Product Description
CZPT tractor spare parts Half shaft gear
We are supplier of tractors spare parts.
We stock more than10000+kinds of 100% Genuine spare parts
at our warehouse.
Also we have diesel engines and engines spare parts.
JIANGXIHU (WEST LAKE) DIS. TY395I, XIHU (WEST LAKE) DIS.HU (WEST LAKE) DIS. KM385BT, QUANCHAI QC495BT,
XINCHAI A495BT,A498BT,CHANGCHAI 4L88, CZPT LOVOL
1004D-4TA69, 1004D-4TA60 etc models.
We can provide one-step service.
You can get perfect pre-sale and after-sales service from our company.
Just contact us please .
Should you wanna know more about our company, contact us today . Thanks!
| Type: | Chang Fa Tractor Parts |
|---|---|
| Usage: | Agricultural Products Processing, Half Shaft Gear |
| Material: | Iron |
| Power Source: | Diesel |
| Weight: | 10lbs |
| After-sales Service: | Online Support |
| Customization: |
Available
| Customized Request |
|---|
Hypoid Bevel Vs Straight Spiral Bevel – What’s the Difference?
Spiral gears come in many different varieties, but there is a fundamental difference between a Hypoid bevel gear and a Straight spiral bevel. This article will describe the differences between the two types of gears and discuss their use. Whether the gears are used in industrial applications or at home, it is vital to understand what each type does and why it is important. Ultimately, your final product will depend on these differences.
Hypoid bevel gears
In automotive use, hypoid bevel gears are used in the differential, which allows the wheels to rotate at different speeds while maintaining the vehicle’s handling. This gearbox assembly consists of a ring gear and pinion mounted on a carrier with other bevel gears. These gears are also widely used in heavy equipment, auxiliary units, and the aviation industry. Listed below are some common applications of hypoid bevel gears.
For automotive applications, hypoid gears are commonly used in rear axles, especially on large trucks. Their distinctive shape allows the driveshaft to be located deeper in the vehicle, thus lowering the center of gravity and minimizing interior disruption. This design makes the hypoid gearset one of the most efficient types of gearboxes on the market. In addition to their superior efficiency, hypoid gears are very easy to maintain, as their mesh is based on sliding action.
The face-hobbed hypoid gears have a characteristic epicycloidal lead curve along their lengthwise axis. The most common grinding method for hypoid gears is the Semi-Completing process, which uses a cup-shaped grinding wheel to replace the lead curve with a circular arc. However, this method has a significant drawback – it produces non-uniform stock removal. Furthermore, the grinding wheel cannot finish all the surface of the tooth.
The advantages of a hypoid gear over a spiral bevel gear include a higher contact ratio and a higher transmission torque. These gears are primarily used in automobile drive systems, where the ratio of a single pair of hypoid gears is the highest. The hypoid gear can be heat-treated to increase durability and reduce friction, making it an ideal choice for applications where speed and efficiency are critical.
The same technique used in spiral bevel gears can also be used for hypoid bevel gears. This machining technique involves two-cut roughing followed by one-cut finishing. The pitch diameter of hypoid gears is up to 2500 mm. It is possible to combine the roughing and finishing operations using the same cutter, but the two-cut machining process is recommended for hypoid gears.
The advantages of hypoid gearing over spiral bevel gears are primarily based on precision. Using a hypoid gear with only three arc minutes of backlash is more efficient than a spiral bevel gear that requires six arc minutes of backlash. This makes hypoid gears a more viable choice in the motion control market. However, some people may argue that hypoid gears are not practical for automobile assemblies.
Hypoid gears have a unique shape – a cone that has teeth that are not parallel. Their pitch surface consists of two surfaces – a conical surface and a line-contacting surface of revolution. An inscribed cone is a common substitute for the line-contact surface of hypoid bevel gears, and it features point-contacts instead of lines. Developed in the early 1920s, hypoid bevel gears are still used in heavy truck drive trains. As they grow in popularity, they are also seeing increasing use in the industrial power transmission and motion control industries.
Straight spiral bevel gears
There are many differences between spiral bevel gears and the traditional, non-spiral types. Spiral bevel gears are always crowned and never conjugated, which limits the distribution of contact stress. The helical shape of the bevel gear is also a factor of design, as is its length. The helical shape has a large number of advantages, however. Listed below are a few of them.
Spiral bevel gears are generally available in pitches ranging from 1.5 to 2500 mm. They are highly efficient and are also available in a wide range of tooth and module combinations. Spiral bevel gears are extremely accurate and durable, and have low helix angles. These properties make them excellent for precision applications. However, some gears are not suitable for all applications. Therefore, you should consider the type of bevel gear you need before purchasing.
Compared to helical gears, straight bevel gears are easier to manufacture. The earliest method used to manufacture these gears was the use of a planer with an indexing head. However, with the development of modern manufacturing processes such as the Revacycle and Coniflex systems, manufacturers have been able to produce these gears more efficiently. Some of these gears are used in windup alarm clocks, washing machines, and screwdrivers. However, they are particularly noisy and are not suitable for automobile use.
A straight bevel gear is the most common type of bevel gear, while a spiral bevel gear has concave teeth. This curved design produces a greater amount of torque and axial thrust than a straight bevel gear. Straight teeth can increase the risk of breaking and overheating equipment and are more prone to breakage. Spiral bevel gears are also more durable and last longer than helical gears.
Spiral and hypoid bevel gears are used for applications with high peripheral speeds and require very low friction. They are recommended for applications where noise levels are essential. Hypoid gears are suitable for applications where they can transmit high torque, although the helical-spiral design is less effective for braking. For this reason, spiral bevel gears and hypoids are generally more expensive. If you are planning to buy a new gear, it is important to know which one will be suitable for the application.
Spiral bevel gears are more expensive than standard bevel gears, and their design is more complex than that of the spiral bevel gear. However, they have the advantage of being simpler to manufacture and are less likely to produce excessive noise and vibration. They also have less teeth to grind, which means that they are not as noisy as the spiral bevel gears. The main benefit of this design is their simplicity, as they can be produced in pairs, which saves money and time.
In most applications, spiral bevel gears have advantages over their straight counterparts. They provide more evenly distributed tooth loads and carry more load without surface fatigue. The spiral angle of the teeth also affects thrust loading. It is possible to make a straight spiral bevel gear with two helical axes, but the difference is the amount of thrust that is applied to each individual tooth. In addition to being stronger, the spiral angle provides the same efficiency as the straight spiral gear.
Hypoid gears
The primary application of hypoid gearboxes is in the automotive industry. They are typically found on the rear axles of passenger cars. The name is derived from the left-hand spiral angle of the pinion and the right-hand spiral angle of the crown. Hypoid gears also benefit from an offset center of gravity, which reduces the interior space of cars. Hypoid gears are also used in heavy trucks and buses, where they can improve fuel efficiency.
The hypoid and spiral bevel gears can be produced by face-hobbing, a process that produces highly accurate and smooth-surfaced parts. This process enables precise flank surfaces and pre-designed ease-off topographies. These processes also enhance the mechanical resistance of the gears by 15 to 20%. Additionally, they can reduce noise and improve mechanical efficiency. In commercial applications, hypoid gears are ideal for ensuring quiet operation.
Conjugated design enables the production of hypoid gearsets with length or profile crowning. Its characteristic makes the gearset insensitive to inaccuracies in the gear housing and load deflections. In addition, crowning allows the manufacturer to adjust the operating displacements to achieve the desired results. These advantages make hypoid gear sets a desirable option for many industries. So, what are the advantages of hypoid gears in spiral gears?
The design of a hypoid gear is similar to that of a conventional bevel gear. Its pitch surfaces are hyperbolic, rather than conical, and the teeth are helical. This configuration also allows the pinion to be larger than an equivalent bevel pinion. The overall design of the hypoid gear allows for large diameter shafts and a large pinion. It can be considered a cross between a bevel gear and a worm drive.
In passenger vehicles, hypoid gears are almost universal. Their smoother operation, increased pinion strength, and reduced weight make them a desirable choice for many vehicle applications. And, a lower vehicle body also lowers the vehicle’s body. These advantages made all major car manufacturers convert to hypoid drive axles. It is worth noting that they are less efficient than their bevel gear counterparts.
The most basic design characteristic of a hypoid gear is that it carries out line contact in the entire area of engagement. In other words, if a pinion and a ring gear rotate with an angular increment, line contact is maintained throughout their entire engagement area. The resulting transmission ratio is equal to the angular increments of the pinion and ring gear. Therefore, hypoid gears are also known as helical gears.
editor by CX 2023-06-06
China Power Tool Spare Parts Spiral Bevel Gear Shaft With Case Harden spurs gear
Situation: New
Guarantee: 1.5 a long time
Condition: BEVEL
Applicable Industries: Hotels, Garment Shops, Constructing Substance Stores, Manufacturing Plant, Equipment Mend Stores, Meals & Beverage Manufacturing facility, Farms, Restaurant, Home Use, Retail, Foodstuff Shop, Printing Retailers, Design works , Energy & Mining, 26585718,CPlanetary Gearbox For CAT325L,DM30,DM45 Meals & Beverage Outlets, Promoting Organization
Weight (KG): five
Showroom Spot: None
Video clip outgoing-inspection: Provided
Equipment Test Report: Supplied
Marketing Type: Normal Solution
Warranty of core factors: 1 Yr
Core Parts: Gear
Tooth Profile: HELICAL Equipment
Route: Still left HAND
Content: Metal
Processing: Forging
Regular or Nonstandard: Standard
Soon after Warranty Provider: On the internet support
Nearby Provider Spot: None
Color: Normal
Sort: OEM Precision Steel Casting Spiral Bevel Gear
Size: Customzied
MOQ: two hundred Pieces
Packaging Specifics: Regular Sea Deserving Deal
Port: ZheJiang , HangZhou
Energy Resource Spare Parts Spiral Bevel Gear Shaft With Case Harden
| We can make common gear and specific equipment as for each drawing or sample. |
We can do warmth treatment method and surface area treatment this kind of as circumstance harden, zinc plating , nick plating , chrome plating, powder coating, blacken and so on.
Our approach involves tooling fabrication, stamping, deep drawing, Custom-made Flat equipment Substantial Top quality Gear punching, spinning, laser chopping, bending, seamless welding, machining and assembly.
Application:Electronic/Equipment/Car/Industrial tools steel stamping hardware components.
principal product
Packaging & Delivery
Company Details
HangZhou CZPT Business Co., Ltd. is a specialized provider of a complete variety of chains, sprockets, gears, equipment racks, v belt pulley, timing pulley, V-belts, 16a Gearbox Handbook Small Fishing Boat Gp Gearbox Wholesale couplings, machined elements and so on.
Thanks to our sincerity in giving ideal services to our clientele, knowing of your wants and overriding perception of accountability toward filling buying needs, we have obtained the have faith in of customers globally. Possessing accumulated cherished expertise in cooperating with foreign clients, our items are offering nicely in the American, European, South American and Asian marketplaces.Our merchandise are made by contemporary computerized equipment and equipment. Meanwhile, our merchandise are produced in accordance to high good quality standards, and complying with the intercontinental advanced common requirements.
With several years’ expertise in this line, we will be trustworthy by our advantages in aggressive cost, one particular-time shipping and delivery, prompt reaction, on-hand engineering assistance and very good after-income solutions.
Moreover, Customization Metal Gears Powder CNC Helical Gears and Spiral Bevel Gears Set For Cone Crusher all our production methods are in compliance with ISO9001 expectations. We also can design and style and make non-regular goods to meet customers’ special specifications. Quality and credit rating are the bases that make a company alive. We will offer ideal companies and substantial top quality goods with all sincerity. If you want any information or samples, please get in touch with us and you will have our before long reply.
Exhibition
Make contact with Us
How to Compare Different Types of Spur Gears
When comparing different types of spur gears, there are several important considerations to take into account. The main considerations include the following: Common applications, Pitch diameter, and Addendum circle. Here we will look at each of these factors in more detail. This article will help you understand what each type of spur gear can do for you. Whether you’re looking to power an electric motor or a construction machine, the right gear for the job will make the job easier and save you money in the long run.
Common applications
Among its many applications, a spur gear is widely used in airplanes, trains, and bicycles. It is also used in ball mills and crushers. Its high speed-low torque capabilities make it ideal for a variety of applications, including industrial machines. The following are some of the common uses for spur gears. Listed below are some of the most common types. While spur gears are generally quiet, they do have their limitations.
A spur gear transmission can be external or auxiliary. These units are supported by front and rear casings. They transmit drive to the accessory units, which in turn move the machine. The drive speed is typically between 5000 and 6000 rpm or 20,000 rpm for centrifugal breathers. For this reason, spur gears are typically used in large machinery. To learn more about spur gears, watch the following video.
The pitch diameter and diametral pitch of spur gears are important parameters. A diametral pitch, or ratio of teeth to pitch diameter, is important in determining the center distance between two spur gears. The center distance between two spur gears is calculated by adding the radius of each pitch circle. The addendum, or tooth profile, is the height by which a tooth projects above the pitch circle. Besides pitch, the center distance between two spur gears is measured in terms of the distance between their centers.
Another important feature of a spur gear is its low speed capability. It can produce great power even at low speeds. However, if noise control is not a priority, a helical gear is preferable. Helical gears, on the other hand, have teeth arranged in the opposite direction of the axis, making them quieter. However, when considering the noise level, a helical gear will work better in low-speed situations.
Construction
The construction of spur gear begins with the cutting of the gear blank. The gear blank is made of a pie-shaped billet and can vary in size, shape, and weight. The cutting process requires the use of dies to create the correct gear geometry. The gear blank is then fed slowly into the screw machine until it has the desired shape and size. A steel gear blank, called a spur gear billet, is used in the manufacturing process.
A spur gear consists of two parts: a centre bore and a pilot hole. The addendum is the circle that runs along the outermost points of a spur gear’s teeth. The root diameter is the diameter at the base of the tooth space. The plane tangent to the pitch surface is called the pressure angle. The total diameter of a spur gear is equal to the addendum plus the dedendum.
The pitch circle is a circle formed by a series of teeth and a diametrical division of each tooth. The pitch circle defines the distance between two meshed gears. The center distance is the distance between the gears. The pitch circle diameter is a crucial factor in determining center distances between two mating spur gears. The center distance is calculated by adding the radius of each gear’s pitch circle. The dedendum is the height of a tooth above the pitch circle.
Other considerations in the design process include the material used for construction, surface treatments, and number of teeth. In some cases, a standard off-the-shelf gear is the most appropriate choice. It will meet your application needs and be a cheaper alternative. The gear will not last for long if it is not lubricated properly. There are a number of different ways to lubricate a spur gear, including hydrodynamic journal bearings and self-contained gears.
Addendum circle
The pitch diameter and addendum circle are two important dimensions of a spur gear. These diameters are the overall diameter of the gear and the pitch circle is the circle centered around the root of the gear’s tooth spaces. The addendum factor is a function of the pitch circle and the addendum value, which is the radial distance between the top of the gear tooth and the pitch circle of the mating gear.
The pitch surface is the right-hand side of the pitch circle, while the root circle defines the space between the two gear tooth sides. The dedendum is the distance between the top of the gear tooth and the pitch circle, and the pitch diameter and addendum circle are the two radial distances between these two circles. The difference between the pitch surface and the addendum circle is known as the clearance.
The number of teeth in the spur gear must not be less than 16 when the pressure angle is twenty degrees. However, a gear with 16 teeth can still be used if its strength and contact ratio are within design limits. In addition, undercutting can be prevented by profile shifting and addendum modification. However, it is also possible to reduce the addendum length through the use of a positive correction. However, it is important to note that undercutting can happen in spur gears with a negative addendum circle.
Another important aspect of a spur gear is its meshing. Because of this, a standard spur gear will have a meshing reference circle called a Pitch Circle. The center distance, on the other hand, is the distance between the center shafts of the two gears. It is important to understand the basic terminology involved with the gear system before beginning a calculation. Despite this, it is essential to remember that it is possible to make a spur gear mesh using the same reference circle.
Pitch diameter
To determine the pitch diameter of a spur gear, the type of drive, the type of driver, and the type of driven machine should be specified. The proposed diametral pitch value is also defined. The smaller the pitch diameter, the less contact stress on the pinion and the longer the service life. Spur gears are made using simpler processes than other types of gears. The pitch diameter of a spur gear is important because it determines its pressure angle, the working depth, and the whole depth.
The ratio of the pitch diameter and the number of teeth is called the DIAMETRAL PITCH. The teeth are measured in the axial plane. The FILLET RADIUS is the curve that forms at the base of the gear tooth. The FULL DEPTH TEETH are the ones with the working depth equal to 2.000 divided by the normal diametral pitch. The hub diameter is the outside diameter of the hub. The hub projection is the distance the hub extends beyond the gear face.
A metric spur gear is typically specified with a Diametral Pitch. This is the number of teeth per inch of the pitch circle diameter. It is generally measured in inverse inches. The normal plane intersects the tooth surface at the point where the pitch is specified. In a helical gear, this line is perpendicular to the pitch cylinder. In addition, the pitch cylinder is normally normal to the helix on the outside.
The pitch diameter of a spur gear is typically specified in millimeters or inches. A keyway is a machined groove on the shaft that fits the key into the shaft’s keyway. In the normal plane, the pitch is specified in inches. Involute pitch, or diametral pitch, is the ratio of teeth per inch of diameter. While this may seem complicated, it’s an important measurement to understand the pitch of a spur gear.
Material
The main advantage of a spur gear is its ability to reduce the bending stress at the tooth no matter the load. A typical spur gear has a face width of 20 mm and will fail when subjected to 3000 N. This is far more than the yield strength of the material. Here is a look at the material properties of a spur gear. Its strength depends on its material properties. To find out what spur gear material best suits your machine, follow the following steps.
The most common material used for spur gears is steel. There are different kinds of steel, including ductile iron and stainless steel. S45C steel is the most common steel and has a 0.45% carbon content. This type of steel is easily obtainable and is used for the production of helical, spur, and worm gears. Its corrosion resistance makes it a popular material for spur gears. Here are some advantages and disadvantages of steel.
A spur gear is made of metal, plastic, or a combination of these materials. The main advantage of metal spur gears is their strength to weight ratio. It is about one third lighter than steel and resists corrosion. While aluminum is more expensive than steel and stainless steel, it is also easier to machine. Its design makes it easy to customize for the application. Its versatility allows it to be used in virtually every application. So, if you have a specific need, you can easily find a spur gear that fits your needs.
The design of a spur gear greatly influences its performance. Therefore, it is vital to choose the right material and measure the exact dimensions. Apart from being important for performance, dimensional measurements are also important for quality and reliability. Hence, it is essential for professionals in the industry to be familiar with the terms used to describe the materials and parts of a gear. In addition to these, it is essential to have a good understanding of the material and the dimensional measurements of a gear to ensure that production and purchase orders are accurate.
editor by czh 2023-03-01
China Sinotruck HOWO Turck Spare Parts Gearbox Main Shaft Sliding Sleeve Gear Wg2210040210 gear ratio calculator
Product Description
FAQ:
Q1. What is your conditions of packing?
A: Generally, we pack our goods in Carton containers and then in picket circumstance.
Q2. What is your conditions of payment?
A: T/T 30% as deposit, and 70% prior to supply. We’ll display you the photos of the merchandise and packages
prior to you pay the stability.
Q3. What is your terms of delivery?
A: EXW, FOB, CPT, CIF.
This fall. How about your shipping time?
A: Generally, it will take 7 to 30 days right after acquiring your progress payment. The specific supply time depends
on the products and the quantity of your get.
Q5. Can you create according to the samples?
A: Of course, we can create by your samples or complex drawings. We can build the molds and fixtures.
Q6. What is your sample coverage?
A: We can provide the sample if we have prepared components in stock, but the clients have to shell out the sample cost and the courier expense.
Q7. Do you take a look at all your products just before shipping?
A: Yes, we have a hundred% check prior to delivery
Q8: How do you make our enterprise prolonged-term and good romantic relationship?
A:1. We hold excellent good quality and aggressive price to make certain our consumers advantage
2. We respect each and every client as our buddy and we sincerely do enterprise and make friends with them, no issue exactly where they occur from.
| After-sales Service: | 3 Months Warranty |
|---|---|
| Warranty: | 3 Months Warranty |
| Type: | Gearbox Spare Parts |
| Material: | Steel |
| Transport Package: | Cartons or Wooden Cases |
| Origin: | China |
###
| Samples: |
US$ 9.5/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
| After-sales Service: | 3 Months Warranty |
|---|---|
| Warranty: | 3 Months Warranty |
| Type: | Gearbox Spare Parts |
| Material: | Steel |
| Transport Package: | Cartons or Wooden Cases |
| Origin: | China |
###
| Samples: |
US$ 9.5/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
Spiral Gears for Right-Angle Right-Hand Drives
Spiral gears are used in mechanical systems to transmit torque. The bevel gear is a particular type of spiral gear. It is made up of two gears that mesh with one another. Both gears are connected by a bearing. The two gears must be in mesh alignment so that the negative thrust will push them together. If axial play occurs in the bearing, the mesh will have no backlash. Moreover, the design of the spiral gear is based on geometrical tooth forms.
Equations for spiral gear
The theory of divergence requires that the pitch cone radii of the pinion and gear be skewed in different directions. This is done by increasing the slope of the convex surface of the gear’s tooth and decreasing the slope of the concave surface of the pinion’s tooth. The pinion is a ring-shaped wheel with a central bore and a plurality of transverse axes that are offset from the axis of the spiral teeth.
Spiral bevel gears have a helical tooth flank. The spiral is consistent with the cutter curve. The spiral angle b is equal to the pitch cone’s genatrix element. The mean spiral angle bm is the angle between the genatrix element and the tooth flank. The equations in Table 2 are specific for the Spread Blade and Single Side gears from Gleason.
The tooth flank equation of a logarithmic spiral bevel gear is derived using the formation mechanism of the tooth flanks. The tangential contact force and the normal pressure angle of the logarithmic spiral bevel gear were found to be about twenty degrees and 35 degrees respectively. These two types of motion equations were used to solve the problems that arise in determining the transmission stationary. While the theory of logarithmic spiral bevel gear meshing is still in its infancy, it does provide a good starting point for understanding how it works.
This geometry has many different solutions. However, the main two are defined by the root angle of the gear and pinion and the diameter of the spiral gear. The latter is a difficult one to constrain. A 3D sketch of a bevel gear tooth is used as a reference. The radii of the tooth space profile are defined by end point constraints placed on the bottom corners of the tooth space. Then, the radii of the gear tooth are determined by the angle.
The cone distance Am of a spiral gear is also known as the tooth geometry. The cone distance should correlate with the various sections of the cutter path. The cone distance range Am must be able to correlate with the pressure angle of the flanks. The base radii of a bevel gear need not be defined, but this geometry should be considered if the bevel gear does not have a hypoid offset. When developing the tooth geometry of a spiral bevel gear, the first step is to convert the terminology to pinion instead of gear.
The normal system is more convenient for manufacturing helical gears. In addition, the helical gears must be the same helix angle. The opposite hand helical gears must mesh with each other. Likewise, the profile-shifted screw gears need more complex meshing. This gear pair can be manufactured in a similar way to a spur gear. Further, the calculations for the meshing of helical gears are presented in Table 7-1.
Design of spiral bevel gears
A proposed design of spiral bevel gears utilizes a function-to-form mapping method to determine the tooth surface geometry. This solid model is then tested with a surface deviation method to determine whether it is accurate. Compared to other right-angle gear types, spiral bevel gears are more efficient and compact. CZPT Gear Company gears comply with AGMA standards. A higher quality spiral bevel gear set achieves 99% efficiency.
A geometric meshing pair based on geometric elements is proposed and analyzed for spiral bevel gears. This approach can provide high contact strength and is insensitive to shaft angle misalignment. Geometric elements of spiral bevel gears are modeled and discussed. Contact patterns are investigated, as well as the effect of misalignment on the load capacity. In addition, a prototype of the design is fabricated and rolling tests are conducted to verify its accuracy.
The three basic elements of a spiral bevel gear are the pinion-gear pair, the input and output shafts, and the auxiliary flank. The input and output shafts are in torsion, the pinion-gear pair is in torsional rigidity, and the system elasticity is small. These factors make spiral bevel gears ideal for meshing impact. To improve meshing impact, a mathematical model is developed using the tool parameters and initial machine settings.
In recent years, several advances in manufacturing technology have been made to produce high-performance spiral bevel gears. Researchers such as Ding et al. optimized the machine settings and cutter blade profiles to eliminate tooth edge contact, and the result was an accurate and large spiral bevel gear. In fact, this process is still used today for the manufacturing of spiral bevel gears. If you are interested in this technology, you should read on!
The design of spiral bevel gears is complex and intricate, requiring the skills of expert machinists. Spiral bevel gears are the state of the art for transferring power from one system to another. Although spiral bevel gears were once difficult to manufacture, they are now common and widely used in many applications. In fact, spiral bevel gears are the gold standard for right-angle power transfer.While conventional bevel gear machinery can be used to manufacture spiral bevel gears, it is very complex to produce double bevel gears. The double spiral bevel gearset is not machinable with traditional bevel gear machinery. Consequently, novel manufacturing methods have been developed. An additive manufacturing method was used to create a prototype for a double spiral bevel gearset, and the manufacture of a multi-axis CNC machine center will follow.
Spiral bevel gears are critical components of helicopters and aerospace power plants. Their durability, endurance, and meshing performance are crucial for safety. Many researchers have turned to spiral bevel gears to address these issues. One challenge is to reduce noise, improve the transmission efficiency, and increase their endurance. For this reason, spiral bevel gears can be smaller in diameter than straight bevel gears. If you are interested in spiral bevel gears, check out this article.
Limitations to geometrically obtained tooth forms
The geometrically obtained tooth forms of a spiral gear can be calculated from a nonlinear programming problem. The tooth approach Z is the linear displacement error along the contact normal. It can be calculated using the formula given in Eq. (23) with a few additional parameters. However, the result is not accurate for small loads because the signal-to-noise ratio of the strain signal is small.
Geometrically obtained tooth forms can lead to line and point contact tooth forms. However, they have their limits when the tooth bodies invade the geometrically obtained tooth form. This is called interference of tooth profiles. While this limit can be overcome by several other methods, the geometrically obtained tooth forms are limited by the mesh and strength of the teeth. They can only be used when the meshing of the gear is adequate and the relative motion is sufficient.
During the tooth profile measurement, the relative position between the gear and the LTS will constantly change. The sensor mounting surface should be parallel to the rotational axis. The actual orientation of the sensor may differ from this ideal. This may be due to geometrical tolerances of the gear shaft support and the platform. However, this effect is minimal and is not a serious problem. So, it is possible to obtain the geometrically obtained tooth forms of spiral gear without undergoing expensive experimental procedures.
The measurement process of geometrically obtained tooth forms of a spiral gear is based on an ideal involute profile generated from the optical measurements of one end of the gear. This profile is assumed to be almost perfect based on the general orientation of the LTS and the rotation axis. There are small deviations in the pitch and yaw angles. Lower and upper bounds are determined as – 10 and -10 degrees respectively.
The tooth forms of a spiral gear are derived from replacement spur toothing. However, the tooth shape of a spiral gear is still subject to various limitations. In addition to the tooth shape, the pitch diameter also affects the angular backlash. The values of these two parameters vary for each gear in a mesh. They are related by the transmission ratio. Once this is understood, it is possible to create a gear with a corresponding tooth shape.
As the length and transverse base pitch of a spiral gear are the same, the helix angle of each profile is equal. This is crucial for engagement. An imperfect base pitch results in an uneven load sharing between the gear teeth, which leads to higher than nominal loads in some teeth. This leads to amplitude modulated vibrations and noise. In addition, the boundary point of the root fillet and involute could be reduced or eliminate contact before the tip diameter.
editor by czh 2023-01-19
China Gear of The Output Shaft of The Demultiplier China Wheel Loader Spare Parts Used Wheel Loader Spare Part Wheel Loader Spare Parts Wheel Loader Spare Parts with Hot selling
Product Description
Dear friends!
My name is Irina Mamoshina. Make sure you pay a moment of your consideration : -).
Our business HangZhou CZPT International Trade Co., Ltd is engaged in the production and sale of car parts for Chinese particular products, engines and products assembly. We also generate steel parts ourselves, these kinds of as gears, fingers, filters, and so on.
Our products include:
— (Xugong) spare areas for front loaders:
ZL30G, ZL40G, ZL50G, ZL50GL, ZL60G, LW3, A, , B7615-1571/411B/Yuchai YC6B125/YC6108
|
US $2.38 / Piece | |
6 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | Internal Gear |
| Manufacturing Method: | Cast Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Stainless Steel |
###
| N/a | Name in Russian | Name in English | Article number | Qty |
| 1 | Болт полый | Hollow Bolt | 1119238 01119238/SP127284 | 5 |
| 2 | Генератор | Generator | 13031590 | 3 |
| 3 | Головка блока цилиндра в сборе | Cylinder head assembly | 13032055 | 12 |
| 4 | Датчик температуры | Temperature sensor | 612600090107/612600090107 | 6 |
| 5 | Держатель топливных фильтров | Fuel Filter Holder | 12189882-A/13028032 | 2 |
| 6 | Клапан задвижки топливного насоса | Fuel pump valve | TD226B-6-000 | 3 |
| 7 | Коллектор воздушный впуской | Air intake manifold | 13034462/4110000846072 | 1 |
| 8 | Коллектор впускной | Intake manifold | 13022552 | 1 |
| 9 | Коллектор выпуской | Exhaust manifold | 13057673 | 11 |
| 10 | Коромысло | Rocker arm | 12214103/13037791 | 12 |
| 11 | Крепление насоса водяного | Water pump mount block | 13025726/Deutz/TD226 | 1 |
| 12 | Крепление топливных трубок | Mounting of fuel tubes | 12165346 | 10 |
| 13 | Крепление топливных трубок | Mounting of fuel tubes | 12166451 | 10 |
| 14 | Патрубок | Branch pipe | 13033682 | 3 |
| 15 | Патрубок | Branch pipe | 13034046/4110000054257/4110001031038 | 3 |
| 16 | Патрубок системы охлаждения масла двигателя | Engine oil cooling system pipe | 13026006 | 3 |
| 17 | Патрубок тосола | Antifreeze nozzle | 12200696 | 3 |
| 18 | Поддон двигателя | Engine tray | 13036094 | 1 |
| 19 | Пробка поддона | Pallet Stopper | 13022897 | 10 |
| 20 | Прокладка адаптера водяного насоса | Water pump adapter gasket | 12158513/4110000054284/SP105131/W47070170 | 10 |
| 21 | Прокладка водяного насоса двигателя | Engine water pump gasket | 12270869/4110000054285/Weichai-Deutz | 10 |
| 22 | ТНВД | Fuel pump | 13051931/4110000846108 | 1 |
| 23 | Топливопровод | Fuel line | 13024894 | 2 |
| 24 | Трубка охлаждающей жидкости двигателя | Engine coolant tube | 13033390/4110000991012/W47002046 | 2 |
| 25 | Турбокомпрессор | Turbocharger | 13030175КН43/13030175 | 2 |
| 26 | Турбокомпрессор | Turbocharger | 13057501/12272277/K24A/13030850 | 2 |
| 27 | Фиксатор форсунки | Nozzle lock | 12159720 | 18 |
| 28 | Шестерня привода масляного насоса | Oil pump drive gear | 12189557/4110000054013/W010250790/SP128978 | 2 |
| 29 | Шкив коленвала ДВС | Crankshaft pulley of the internal combustion engine | 13032345 | 2 |
| 30 | Амортизатор капота | Hood shock absorber | 2120900570 | 20 |
| 31 | Амортизатор капота (L=480 мм) | Hood shock absorber (L=480 mm) | 29330011391 | 20 |
| 32 | Блок сателлитов бортового редуктора с шестернями (3 сателита) | On-board gearbox satellite unit with gears (3 satellites) | 29070018761 | 1 |
| 33 | Блок сателлитов бортового редуктора с шестернями | Satellite unit of the on-board gearbox with gears | 2907000765 | 1 |
| 34 | Болт | Pin | 01151569/Q150B0816 | 100 |
| 35 | Болт крепления переднего моста | Front axle mounting bolt | М30*110/29070001031 | 100 |
| 36 | Вал соеднительный КПП | Shaft connecting gearbox | 4110000160059 | 1 |
| 37 | Втулка | Bushing | 100*115*137/4043000419 | 6 |
| 38 | Втулка | Bushing | 29250009421 | 6 |
| 39 | Втулка | Bushing | 95*110*144/4043000320 | 6 |
| 40 | Втулка рулевого гидроцилиндра | Steering cylinder sleeve | 4120000560013/4120000560507 | 6 |
| 41 | Втулка рулевого гидроцилиндра | Steering cylinder sleeve | 4120001004406 | 6 |
| 42 | Гидрораспределитель | Hydraulic distributor | 4120000561/SD32-16 | 1 |
| 43 | Гидрораспределитель | Hydraulic distributor | 4120002278/YGDF32-18 | 1 |
| 44 | Гидротрансформатор (Конвертер) в корпусе | Torque converter (Converter) in the housing | 4110000084 | 1 |
| 45 | Гидроусилитель (Шлицевой) | Hydraulic booster (Splined) | BZZ3-E125B | 1 |
| 46 | Гидроцилиндр наклона | Tilt hydraulic cylinder | 4120000601/968 | 1 |
| 47 | Гидроцилиндр поворота | Hydraulic turning cylinder | 4120000560/LG953 | 1 |
| 48 | Гипоидная пара (против часовой) редуктора заднего моста | Hypoid pair (counterclockwise) of the rear axle gearbox | 21909005021 | 1 |
| 49 | Гипоидная пара (против часовой) | Hypoid pair (counterclockwise) | 29090001091/29090000081/3050900203 | 1 |
| 50 | Гипоидная пара (против часовой) | Hypoid pair (counterclockwise) | 3050900203 | 1 |
| 51 | Гипоидная пара (против часовой) | Hypoid pair (counterclockwise) | 21909004931 L | 1 |
| 52 | Гипоидная пара (по часовой) | Hypoid pair (clockwise) | 21909004931 R | 1 |
| 53 | Диск тормозной | Brake disc | 3090900009 LG946 | 2 |
| 54 | Диск тормозной | Brake disc | 918/29070010481 | 2 |
| 55 | Клапан гидрораспределителя | Hydraulic distributor valve | 4120001054001/D32.2A-00 | 1 |
| 56 | Колодка ручного тормоза (комплект 2 шт.) | Handbrake pad (set of 2 pcs.) | 4120000087044+4120000087043 | 10 |
| 57 | Колодка тормозная (квадратная) | Brake pad (square) | 918/ZL15.5.1/Z200266/7200000208 | 20 |
| 58 | Корпус сателитов бортового редуктора | On-board gearbox satellite housing | 29070007661/933/933L/936/936L/938/938L | 1 |
| 59 | Крышка топливного бака | Fuel tank cap | 4120001404 | 2 |
| 60 | Палец планетарной шестерни | PLANETARY GEAR PIN | 3050900043 | 4 |
| 61 | Патрубок радиатора ДЛИНА 850 ДИАМЕТР 45 ВНУТР | Radiator nozzle LENGTH 850 DIAMETER 45 INTERNAL | 02637/LG953 | 2 |
| 62 | Радиатор кондиционера кабины | Cabin air conditioner radiator | 4190001338 | 1 |
| 63 | Реле звукового сигнала | Audio signal relay | 4130000009001 | 5 |
| 64 | Ремкомплект гидроцилиндра ковша | Bucket Hydraulic Cylinder Repair Kit | 4120000868101/k9360300031/LG936 | 2 |
| 65 | Ремкомплект гидроцилиндра подъёма стрелы | Boom Lifting Hydraulic Cylinder Repair Kit | k9360300041/LG936 | 2 |
| 66 | Ремкомплект гидроцилиндра подъёма стрелы | Boom Lifting Hydraulic Cylinder Repair Kit | 918/4120001153001 | 2 |
| 67 | Ремкомплект рулевого гидроцилиндра | Steering cylinder Repair kit | 4120001004007/936 | 2 |
| 68 | Сальник | Oil seal | 80*105*10/4043000256 | 10 |
| 69 | Трос переключения скоростей в сборе (длина 1840мм) | Gearshift cable assembly (length 1840 mm) | 4190000393/1 | 5 |
| 70 | Трос управления гидравликой (1740 мм) | Hydraulic control cable (1740 mm) | 29120010971-1 | 5 |
| 71 | Трубка смазки | Lubrication tube | 29270017601 | 3 |
| 72 | Трубка тормозная заднего моста левая | Rear axle brake tube left | 29220004161 | 3 |
| 73 | Трубка тормозная заднего моста правая | Rear axle brake tube right | 29220004171/УТ000015881 | 3 |
| 74 | Трубка тормозная переднего моста левая | Front axle brake tube left | 29220004131 | 3 |
| 75 | Трубка тормозная переднего моста правая | Front axle brake tube right | 29220004121 | 3 |
| 76 | Указатель давления воздуха | Air pressure indicator | 4130000858 | 3 |
| 77 | Указатель уровня топлива | Fuel level indicator | 4130000209/4130000235/4120000082 | 3 |
| 78 | Фильтр всасывающей магистрали | Suction line filter | 29100010291 | 3 |
| 79 | Фильтр сапуна КПП | Gearbox Breather Filter | 4120005390 | 5 |
| 80 | Фильтр топливного бака-ТОПЛИВОЗАБОРНИК | Fuel tank filter-FUEL INTAKE | 29020008421/958L | 2 |
| 81 | Фонарь задний | Rear light | 4130000270/4130000213 | 6 |
| 82 | Шайба регулировочная | Adjusting washer | 4043000151/60*130*2/4043000151-2 | 50 |
| 83 | Шпонка | Key | 4090000008/GB308-9.525-GCr15 | 10 |
| 84 | Штифт | Pin | 4016000113 | 10 |
| 85 | Вал коленчатый двигателя | Crankshaft of the engine | 13032128/13032128+001/4110000909105/12272496/Deutz WP6G125 | 3 |
| 86 | Держатель ролика | Roller Holder | 13020864/Deutz/TD226B-6G | 4 |
| 87 | Поршневая группа двигателя | Engine piston group | 13020377/Deutz/TBD226B-6D | 1 |
| 88 | Прокладка крышки клапанов двигателя | Engine valve cover gasket | 12270879/Deutz/TD226B-6/WP6G125E22 | 200 |
| 89 | Поршень | Piston | 612600030015/D=126 G2-II/CDM 855/WD615 LonKing | 6 |
| 90 | Болт с гайкой крепления бокового зуба | Bolt with nut for fixing the side tooth | 4043000337/4013000016/(M16*40)/LG933, LG936 | 20 |
| 91 | Вал с шестерней привода насоса диаметр 34 мм, 6 шлицов, 39 зубьев | Shaft with pump drive gear diameter 34 mm, 6 slots, 39 teeth | 29050016421 | 1 |
| 92 | Вал с шестерней привода насоса диаметр 34 мм, 6 шлицов, 42 зубьев | Shaft with pump drive gear diameter 34 mm, 6 slots, 42 teeth | 3030900094 | 1 |
| 93 | Втулка пальца маятника центральная | Pendulum finger central sleeve | 3070900431/LG 952/100x120x110 | 6 |
| 94 | Главная пара заднего моста 7/37 левая (23 шлица, L хвостовика 330 мм) | Main pair of rear axle 7/37 left (23 slots, L shank 330 mm) | 2909000008/2909000007/LG956 | 2 |
| 95 | Зуб ковша правый | Bucket tooth right | 29170036961/LG 933,936 | 10 |
| 96 | Колодка стояночного тормоза | Parking brake pad | 4120000087043/LG933/LG936 | 40 |
| 97 | Мотор отопителя | Heater motor | 4190000160001/LG933/936 | 2 |
| 98 | Насос-дозатор (Гидроруль)(шпонка) | Metering pump (Hydraulic steering)(key) | 250100112/BZZ-125/BZZ3-E125/W083200000B | 2 |
| 99 | Палец 85х245 маятника (рокера) стрелы | Pin 85×245 pendulum (rocker) arrows | 4043000120/LG 933,936 | 5 |
| 100 | Палец 95х250 крепления подъемного цилиндра (у кабины) | Pin 95×250 mounting the lifting cylinder (at the cabin) | 4043000017/LG 952, 953, 956 | 6 |
| 101 | Ремкомплект ПГУ | Pneumatic hydraulic booster repair kit | LG40A-XLB/LG40A | 10 |
| 102 | Ремкомплект ПГУ | Pneumatic hydraulic booster repair kit | 412000009001/LYG60A | 20 |
| 103 | Сальник (железная обойма) пальца тяга-ковш, тяга-коромысло | Oil seal (iron clip), thrust-bucket, thrust-rocker arm | 4043000056/LG952/LG-953/85*100*8 | 30 |
| 104 | Сальник NSK | Oil seal NSK | 75*100*12 | 15 |
| 105 | Щетка с поводком очистителя ветрового стекла (под 2 шлицевых вала) | Brush with windscreen cleaner leash (under 2 spline shafts) | K936022004 | 20 |
| 106 | Каток двубортный | Skating rink double-breasted | 16Y-40-10000/SD16 | 2 |
| 107 | Радиатор масляный | Oil radiator | 4061161/SD22 SHANTUI | 1 |
| 108 | Блок цилиндров двигателя | Engine cylinder block | 330-1002170, 330-1002015A, 330-1002114, B7615-1002000/Yuchai YC6B125/YC6108 | 1 |
| 109 | Вилка переключения высокой и низкой передач | High and low gear shift fork | 860114724/ZL20-030048/4110000038315/860114724/LW300FN | 2 |
| 110 | Гидротрансформатор | Torque converter | 800351249/LW300FN | 2 |
| 111 | Клапан выпускной двигателя | Engine exhaust valve | 330-1007012C, 330-1007012, 330-1007012C, D30-1003103B/Yuchai YC6B125/YC6108 | 12 |
| 112 | Палец рулевого цилиндра | Steering cylinder pin | 251400276/251702703/40*140 | 20 |
| 113 | Палец балансира заднего моста (вилка) | Rear axle balance pin (fork) | 250100212/Z3.8.5/250100212/Z3.8.5/50*145 | 10 |
| 114 | Палец вилка (рама гц ковша) | Pin fork (bucket hydraulic cylinder frame) | Z5G.6.21/251400270/80*240 | 6 |
| 115 | Трубка топливная (обратка форсунок) двигателя | Fuel tube (return of injectors) of the Yuchai engine | 695-1104040, B7604-1104040A/YC6B125/YC6108/Yuchai | 1 |
| 116 | Шайба медная форсунки двигателя | Copper washer of the engine nozzle | 630-1112001-1.2, 630-1112001, 4110001026098, 4110000560089/Yuchai YC6B125/YC6108 | 100 |
| 117 | Палец | Pin | 11D0001/ZL50C.11.2/90×195 LiuGong | 4 |
| 118 | Блок сателлитов бортового редуктора в сборе с сателитами | Satellite unit of the on-board gearbox assembly with satellites | 83513206 | 1 |
| 119 | Болт гайки ступицы | Hub Nut Bolt | 83319015 | 10 |
| 120 | Болт крепления переднего моста в сборе с гайкой | Front axle mounting bolt assembly with nut | 805002107+805201458/LW300F | 20 |
| 121 | Болт крепления подвески заднего моста в сборе с гайкой | Rear axle suspension mounting bolt assembly with nut | 805000671+805201458/M24*2*220 L=21/LW300F | 10 |
| 122 | Болт крепления моста с гайкой | Bridge mounting bolt with nut | ZL50E.6-9/М30/ZL50E.6-9/250400522 | 10 |
| 123 | Болт среднего ножа с гайкой | Middle knife bolt with nut | GB10-88 M16*50 | 50 |
| 124 | Вал карданный | Cardan shaft | 103040002 | 1 |
| 125 | Вал карданный | Cardan shaft | 103040011(7207-577A)GR215/10304002 | 1 |
| 126 | Вал карданный | Cardan shaft | 103040037(PY132L(450)GR215 | 1 |
| 127 | Вал карданный | Cardan shaft | 103040038/(PY132J) GR215 | 1 |
| 128 | Вал карданный | Cardan shaft | 800300191 | 1 |
| 129 | Вал карданный | Cardan shaft | Z3G.4.1-1/252700128/350K.032 | 1 |
| 130 | Вал карданный задний | Rear cardan shaft | 9305264 | 1 |
| 131 | Вал карданный передний (зад. часть) | Front cardan shaft (rear part) | 9322646-2 | 1 |
| 132 | Вал карданный передний (зад. часть) | Front cardan shaft (rear part) | Z3G.4.1-2 | 1 |
| 133 | Вал карданный с подвесным подшипником в сборе | Cardan shaft with outboard bearing assembly | 252906871 | 1 |
| 134 | Вал КПП 2-ой передачи | 2nd gear gearbox shaft | LW300/860114665/ZL20-033002 | 1 |
| 135 | Вал КПП задней передачи | Reverse gear gearbox shaft | LW300/860114664/ZL20-036003 | 1 |
| 136 | Вал основной ступичный | Main hub shaft | 83513201/SP105819/PY180.39.02-01 | 1 |
| 137 | Вилка фланцевая вала карданного промежуточного | Flange fork of the cardan intermediate shaft | Z3.4.2-01/LW300 | 4 |
| 138 | Втулка | Bushing | 50*65*70/250200493/9301647 | 4 |
| 139 | Втулка | Bushing | 55*58*21/Z3G.8-5/251900107 | 4 |
| 140 | Втулка | Bushing | 60*68*75/252600350 | 4 |
| 141 | Втулка | Bushing | 77*90*17/252600717/9364818/300K.5-1A | 4 |
| 142 | Втулка | Bushing | 85513041/95*76*20 | 4 |
| 143 | Втулка | Bushing | 86*100*18/85513042 | 4 |
| 144 | Втулка вала | Shaft bushing | 60*70*27/860114728/zl20-030032 | 4 |
| 145 | Втулка нижняя | Lower bushing | ZL50E-6-2/250400147 | 4 |
| 146 | Упорная втулка подшипника | Thrust bearing sleeve | 85513034 | 3 |
| 147 | Выключатель давления | Pressure switch | 803676181/PS67-15-2MNZ-A-FLSM08-IP-FS5BARR | 2 |
| 148 | Выключатель давления | Pressure switch | 803678456 | 2 |
| 149 | Гайка | Bolt nut | 71270231 | 5 |
| 150 | Гайка | Bolt nut | 75501646/ZL50EX.04.01.01-017/LG50F.04420A | 5 |
| 151 | Гидроцилиндр | Hydraulic cylinder | 020130000/PY160M | 1 |
| 152 | Гидроцилиндр | Hydraulic cylinder | 140015/PY160-G3 | 1 |
| 153 | Гидроцилиндр подъема | Hydraulic lifting cylinder | 120065/PY180-G6 | 1 |
| 154 | Гидроцилиндр подъема правый | Hydraulic lifting cylinder right | 9326008/Z5G.7.1.3A/252100628 | 1 |
| 155 | Гидроцилиндр подъема стрелы (правый) | Boom lifting hydraulic cylinder (right) | 803071259/XGYG01-129 | 1 |
| 156 | Гидроцилиндр подъема стрелы левый | Boom lifting hydraulic cylinder left | 803013063 | 1 |
| 157 | Гидроцилиндр стрелы (левый) | Boom hydraulic cylinder (left) | 252100629/Z5G.7.1.24A/9326009 | 1 |
| 158 | Гипоидная пара (по часовой) | Hypoid pair (clockwise) | 82215102/82215103 | 1 |
| 159 | Датчик давления масла | Oil pressure sensor | 803502505 | 4 |
| 160 | Датчик температуры воды | Water temperature sensor | 803545325 | 4 |
| 161 | Датчик температуры КПП | Gearbox temperature sensor | 803502732 | 4 |
| 162 | Датчик температуры масла КПП | Gearbox Oil temperature sensor | 803502420 | 4 |
| 163 | Зеркало | Mirror | 801902760/LW300FN | 4 |
| 164 | Зуб центральный | Central tooth | Z3.11.1-1/9301653/250100248/860103046 | 20 |
| 165 | Клапан предохранительный | Safety valve | 803004050(LW500FN) | 2 |
| 166 | Клапан приоритета | Priority Valve | FLD-30Z/ZL30G | 2 |
| 167 | Клапан тормозной | Brake valve | 101000059 | 1 |
| 168 | Колодка тормозная | Brake pad | 103070018/PY180-H.2.6.3 | 4 |
| 169 | Кольцо | Ring | 130*3.1(GB1235-76) | 5 |
| 170 | Кольцо | Ring | 53000013/130-135-30 | 5 |
| 171 | Кольцо нижнего пальца сочленения | Ring of the lower pin of the articulation | 80*5,7/GB1235-76 | 10 |
| 172 | Кольцо стопорное | Locking ring | 52100009 (d-45) | 10 |
| 173 | Корпус планетарной передачи | Planetary Transmission Housing | 83513202/SP115141 | 1 |
| 174 | Корпус тормозного механизма | Brake mechanism housing | PY180-H.2.6.1 | 1 |
| 175 | Кран воздухозаборника | Air intake valve | 252101539 | 2 |
| 176 | Крестовина редуктора моста | Bridge Gearbox Crosspiece | 275101723 | 5 |
| 177 | Кронштейн медной направляющей | Copper guide bracket | 001210005/001210530/PY180G.10.1-1 | 2 |
| 178 | Крышка | Cap | 85513019 | 1 |
| 179 | Крышка нижнего подшипника | Lower bearing cover | 252900353 | 1 |
| 180 | Кулак поворотный левый | Left rotary fist | 1500028 | 1 |
| 181 | Кулак поворотный правый | Right rotary fist | 1500026 | 1 |
| 182 | Накладка | Overlay | 0011312001/GR215.12.2/PY180G.12-7/001210031 | 2 |
| 183 | Накладка | Overlay | 001210030/PY180G.12-6A | 2 |
| 184 | Направляющие медные | Copper guides | 001210007/PY180G.10.1-3/001210007/381600371 | 2 |
| 185 | Насос водяной | Water pump | 860121354/J3600-1307020C | 2 |
| 186 | Насос гидравлический | Hydraulic pump | CBT-E316/CBN-F316 | 1 |
| 187 | Насос гидравлический | Hydraulic pump | CBG2040/JHP2040/W060600000 | 1 |
| 188 | Насос гидравлический (13 шлицов) для фронтального погрузчика | Hydraulic pump (13 slots) for front loader | CBGJ1032/changlin zlm30-5 | 1 |
| 189 | Насос гидравлический (шпонка) | Hydraulic pump (key) | CBGJ2080/5002029/860102735/5002029/860102633/803004540 | 1 |
| 190 | Насос гидравлический (шпонка) | Hydraulic pump (key) | CBGj2100/5000035 | 1 |
| 191 | Насос гидравлический | Hydraulic pump | P5100-F100CX/BL0351/803004078 | 1 |
| 192 | Нож | Knife | 2130*150*20/GR215A | 1 |
| 193 | Нож NEW | Knife NEW | 2130*152*19/GR215A | 1 |
| 194 | Обойма маслосъемная | Oil-removing clip | 83021509 | 2 |
| 195 | Обойма подшипника | Bearing cage | 85513015 | 2 |
| 196 | Палец | Pin | 60*135/252600335/9358267/300K.5-2 | 4 |
| 197 | Палец гидроцилиндра ковша задний (ухо) | Bucket rear hydraulic cylinder pin (ear) | 251702733/60*167 | 4 |
| 198 | Палец | Pin | 60*212 LW330F (II).8.4 | 4 |
| 199 | Палец стрелового цилиндра (Ухо) | Arrow cylinder Pin (Ear) | 251700192/60*230/LW300FN | 4 |
| 200 | Палец ковша нижний | Bucket bottom pin | ZL50GA.7.1/65*200 | 4 |
| 201 | Палец | Pin | 85*220/252903797/4043004230 | 4 |
| 202 | Палец сочленения | Joint pin | GR215PY180G.14-6 | 4 |
| 203 | Палец сочленения | Joint pin | GR215PY180G.14-7 | 4 |
| 204 | Переключатель скоростей (L= 2500 мм) | Speed switch (L= 2500 mm) | LW520G.2.1A/800302763 | 1 |
| 205 | Подшипник | Bearing | 54100005/32022/B120400012/2007122E | 3 |
| 206 | Подшипник | Bearing | 32026X/54100007 | 3 |
| 207 | Подшипник | Bearing | 33113/54100059/54100014/7813 | 3 |
| 208 | Подшипник подвесной | Suspension bearing | 860111011/ZL50G | 2 |
| 209 | Полуось левая | Left half-axis | W44002006/80513003 | 1 |
| 210 | Полуось правая | Right half-axis | 80513004/SP105549/W44002007/80513005 | 1 |
| 211 | Прокладка поддона картера | Sump pallet gasket | ZL20-030020/LW300FN/4110000038130 | 4 |
| 212 | РВД гидроцилиндр наклона ковша | High pressure hose bucket tilt cylinder | 251702648/300FS.7.1.3/LW300FN | 1 |
| 213 | Редуктор моста (против часовой) | Bridge reducer (counterclockwise) | 4.Z3.2.00A | 1 |
| 214 | Редуктор моста | Bridge reducer | 83513200 | 1 |
| 215 | Редуктор переднего моста (по часовой) | Front axle gearbox (clockwise) | 250300319/800302262 | 1 |
| 216 | Реле | Relay | 803604498/XGJD02(JD2914J) | 5 |
| 217 | Ролик 6х30 подшипника игольчатого | Needle bearing roller 6×30 | 75600330 | 10 |
| 218 | Сиденье оператора (без подлокотников) | Operator’s seat (without armrests) | 801902761/XGZY01-II/FS16D-03/LW300F | 1 |
| 219 | Ступица передняя | Front hub | PY180G.17.7 | 1 |
| 220 | Трос ручного тормоза 160 см | Hand brake cable 160 cm | ZL50E.9.12 | 2 |
| 221 | Трос управления гидравликой (L-2,10 м) | Hydraulic control cable (L-2.10 m) | 9101525/LW500 | 2 |
| 222 | Трубка обратки | Return tube | LW300F P7604-1104040A | 2 |
| 223 | Тяга рулевая | Steering rod | 001500031 | 1 |
| 224 | Механический указатель давления масла двигателя 0-1МРа | Mechanical engine oil Pressure Gauge 0-1MRa | 803502459/LW300 | 2 |
| 225 | Указатель температуры воды | Water temperature indicator | 803502410/4130000215 | 2 |
| 226 | Фильтр гидравлический | Hydraulic filter | 101010157 | 10 |
| 227 | Фильтр гидравлическй | Hydraulic filter | 50G2-06027 | 10 |
| 228 | Фильтр гидробака обратной магистрали (200*190) | Return line hydraulic tank filter (200*190) | 250400462/ZL50E.7.3.4/LW560F.7.1.13.2/9314932/ZL50G | 10 |
| 229 | КПП фильтр сетка | Gear shift box filter grid | ZL40A.30.4.2/4110000184138 | 10 |
| 230 | Фильтр топливный грубой очистки | Coarse fuel filter | 860118458/D00-305-01+A/4110000186393 | 10 |
| 231 | Фланец | Flange | 250300341/ZL50.2A.1A.3.1-2A/9352558 | 2 |
| 232 | Фланец | Flange | 252600573 | 2 |
| 233 | Фланец | Flange | Z5G.6-10 | 2 |
| 234 | Фланец | Flange | Z5G.6-11 | 2 |
| 235 | Фланец вала гидромуфты | Hydraulic coupling shaft flange | 860114582/ZL30D-11-12/LW300 | 2 |
| 236 | Фланец вала карданного | Cardan shaft flange | 860118415 | 2 |
| 237 | Фланец насоса | Pump flange | CBGj3125/LW300F (251700223/300F.7.2-2/9364967) | 2 |
| 238 | Верхний фланец поворота | Upper turning flange | Z3G.8-1 | 2 |
| 239 | Фонарь задний | Rear light | 803506733 | 4 |
| 240 | Червь | Worm drive (worm) | HX8000A-15 | 1 |
| 241 | Шайба | Puck | 001210108 | 4 |
| 242 | Шайба | Puck | 001210110 | 4 |
| 243 | Шайба | Puck | 52060006 | 10 |
| 244 | Шайба | Puck | 75600457 | 10 |
| 245 | Шестерня | Gear | НХ8000А-14 | 1 |
| 246 | Шестерня на полуось | Gear on the half-axle | 83000802/W44003100/W041400471/860115239 | 2 |
| 247 | Шестерня сателлита | Satellite Gear | 83000801/29070012711/W041400491/860115217 | 2 |
| 248 | Шестерня солнечная (РАЗБОРНАЯ ПОД СТОПОР) Z-67/61 шлиц | Solar gear (COLLAPSIBLE UNDER THE STOPPER) Z-67/61 slot | ZL60D.24.1-19-1/ZL60D.24.1-23/ZL60D.24.1-3/LG50F.04428A-1 | 1 |
| 249 | Солнечная шестерня | Солнечная шестерня | 77500938/77500940/77500938BD | 1 |
| 250 | Шестерня солнечная Z=49 | Solar gear Z=49 | SP109914/76101031 | 1 |
| 251 | Шкворень (длинный) | Pin (long) | 001500021 | 2 |
| 252 | Шпилька колеса с гайкой | Wheel stud with nut | 250300312/250300296 | 100 |
| 253 | Шпилька колесная с гайкой | Wheel stud with nut | 3382 | 100 |
| 254 | Шпилька колесная с гайкой | Wheel stud with nut | 3399 | 100 |
| 255 | Шпилька колесная с гайкой | Wheel stud with nut | 3700 | 100 |
| 256 | Шпилька колесная с гайкой | Wheel stud with nut | 5143 | 100 |
| 257 | Шпилька колесная с гайкой | Wheel stud with nut | 7936 | 100 |
| 258 | Шпилька колесная с гайкой | Wheel stud with nut | 805200052/29070000621 | 100 |
| 259 | Шпилька колесная с гайкой | Wheel stud with nut | 9106 | 100 |
| 260 | Вал карданный | Cardan shaft | Z320730160 | 1 |
| 261 | Вал карданный | Cardan shaft | Z5B366100 | 1 |
| 262 | Вал карданный задний | Rear cardan shaft | Z520100030 | 1 |
| 263 | Вал привода насоса ГМП | Hydromechanical transmission pump drive shaft | W020200151/W021300030B | 1 |
| 264 | Втулка | Bushing | 60*75*28/Z3B00303000 | 6 |
| 265 | Втулка | Bushing | 75*66*60/Z3B00303200 | 6 |
| 266 | Втулка | Bushing | 80*95*40/MG19002139 | 4 |
| 267 | Втулка | Bushing | MG19026014 | 6 |
| 268 | Втулка | Bushing | MG19026023 | 6 |
| 269 | Втулка вала (6*10 шлицов) | Shaft sleeve (6*10 slots) | 6 | |
| 270 | Втулка ковша | Bucket bushing | Z3100105602 | 4 |
| 271 | Втулка сочленения | Joint bushing | 80*95*78/Z620030370 | 4 |
| 272 | Гидрораспределитель | Hydraulic distributor | W42020000 | 1 |
| 273 | Гидроусилитель руля | Power steering | W42009000 | 1 |
| 274 | Гидроцилиндр выдвижения среднего отвала | Hydraulic cylinder for extending the middle blade | W42028000/80*50*630 | 1 |
| 275 | Гидроцилиндр выдвижения среднего отвала W42030000/80*45*1175 | Hydraulic cylinder for extending the middle blade | W42030000 | 1 |
| 276 | Диск ступичный | Hub disk | MG19026027 | 1 |
| 277 | Диск тормозной | Brake disc | W043100220 | 1 |
| 278 | Зуб боковой (левый) | Side tooth (left) | Z510010882 | 4 |
| 279 | Зуб боковой (правый) | Side tooth (right) | Z510010891 | 4 |
| 280 | Зуб боковой левый | Left side tooth | W110008115B | 2 |
| 281 | Зуб боковой правый | Right lateral tooth | W110008117B | 2 |
| 282 | Клапан гидроцилиндра | Hydraulic cylinder valve | W42000031/S1CH4-18-220G | 2 |
| 283 | Кулак поворотный (левый) | Rotary fist (left) | MG19026005 | 1 |
| 284 | Накладка | Overlay | MG19005032 | 2 |
| 285 | Насос гидравлический | Hydraulic pump | W42053000/PGM511A0190B-03 | 1 |
| 286 | Опора промежуточная | Intermediate support | W040300000 | 1 |
| 287 | Опора промежуточная | Intermediate support | W045000000 | 1 |
| 288 | Палец | Finger | 45*160/MG19026008 | 2 |
| 289 | Палец | Finger | 45*190/MG19026013 | 4 |
| 290 | Палец | Finger | 60*140/Z310020640 | 4 |
| 291 | Палец | Finger | Z320020660/60*200 | 4 |
| 292 | Палец | Pin | Z320020691 | 4 |
| 293 | Палец | Pin | Z510010561/6571L303200/80*235 | 2 |
| 294 | Палец | Pin | Z5100107902/80*268 | 2 |
| 295 | Палец | Pin | Z5100200732/70*325 | 4 |
| 296 | Палец | Pin | Z510020671/6571P301100/80*253 | 4 |
| 297 | Палец | Pin | Z510020731/6571L303000/70*323 | 4 |
| 298 | Палец | Pin | Z510020861/50*145 | 4 |
| 299 | Палец сочленения | Joint pin | Z310010280 | 2 |
| 300 | Верхний палец сочленения | Upper pin articulation | Z520031220 | 2 |
| 301 | Палец сочленения нижний | Joint finger lower | Z520030591 | 2 |
| 302 | Палец стрела-гидроцилиндр стрелы | Finger Arrow-Boom hydraulic cylinder | Z310010040 | 2 |
| 303 | Пластина | Plate | MG19026010 | 10 |
| 304 | Пластина | Plate | MG19026051 | 10 |
| 305 | Пластина | Plate | MG19026082 | 10 |
| 306 | Пластина проставочная | Spacer plate | MG19004034 | 10 |
| 307 | Пластина проставочная | Spacer plate | MG19004036 | 10 |
| 308 | Пластина проставочная | Spacer plate | W44000014 | 10 |
| 309 | Подшипник | Bearing | 50308/В121134023 | 2 |
| 310 | Подшипник | Bearing | B120406028/32212 | 2 |
| 311 | Подшипник | Bearing | W44000002 | 2 |
| 312 | Редуктор моста передний | Front axle gearbox | W041400701 | 1 |
| 313 | Ремкомплект гидроцилиндра наклона ковша | Bucket Tilt Hydraulic Cylinder Repair Kit | W054300000B/W054300010B | 2 |
| 314 | Ремкомплект КПП (КОМПЛЕКТ) | GEARBOX Repair KIT (KIT) | TR1-200 | 2 |
| 315 | Сальник (кассетный) | Oil seal (cassette) | W043100453/130*170*15 | 6 |
| 316 | Сальник | Oil seal | 130*150*12/Z510010860 | 6 |
| 317 | Сальник | Oil seal | W44000004 | 6 |
| 318 | Сальник | Oil seal | W44000010 | 6 |
| 319 | Фильтр гидравлический | Hydraulic filter | W110015510А/YL-161-100 | 6 |
| 320 | Фильтр гидравлический | Hydraulic filter | W42000008 | 6 |
| 321 | Фильтр сапуна гидробака | Hydraulic tank breather filter | W380000010A | 10 |
| 322 | Фильтр сапуна гидробака | Hydraulic tank breather filter | W380000010A | 10 |
| 323 | Фильтр трансмиссии | Transmission filter | W110012551 | 10 |
| 324 | Фильтр трансмиссии | Transmission filter | W154200010 | 10 |
| 325 | Фильтр трансмиссии | Transmission filter | Z510210890 | 10 |
| 326 | Фильтр-элемент | Filter element | W110015510A/YL-161-00 | 10 |
| 327 | Фланец | Flange | MG19002140 | 2 |
| 328 | Фланец | Flange | MG19013002 | 2 |
| 329 | Фланец | Flange | Z310390130 | 2 |
| 330 | Блок фрикционов в сборе | Friction block assembly | NZ51021043000 | 1 |
| 331 | Блок фрикционов в сборе | Friction block assembly | NZ51021058000 | 1 |
| 332 | Втулка | Bushing | 50*65*36/4043000290 | 6 |
| 333 | Втулка | Bushing | 80*100*120/Z5100100102 | 6 |
| 334 | Диск фрикционный | Friction disc | Z510210460 | 20 |
| 335 | Сальник | Oil seal | 70*90*10/B160420007/LG50F.11006/LG853.11.08 | 6 |
| 336 | Втулка | Bushing | Z30.8-3B | 2 |
| 337 | Втулка | Bushing | Z60F.12-12/90*100*39 | 2 |
| 338 | Втулка | Bushing | Z60F.12-13 | 2 |
| 339 | Втулка | Bushing | Z60F.12-3 | 2 |
| 340 | Втулка крепления моста | Bridge mounting sleeve | Z30.8-4A | 2 |
| 341 | Диск тормозной | Brake disc | Z583-06-20A | 2 |
| 342 | Диск фрикционный | Friction disc | Z50B.4.2-7 | 20 |
| 343 | Зуб боковой левый | Left side tooth | ZL50.7A.2-1 | 2 |
| 344 | Зуб боковой правый | Right lateral tooth | ZL50.7A.2-2 | 2 |
| 345 | Центральный зуб | Central tooth | ZL50.7-4 | 6 |
| 346 | Клапан тормозной | Brake valve | W-18-00097/CL50A-3514002 | 1 |
| 347 | Клапан трансмиссии | Transmission valve | Z30.4.13 | 1 |
| 348 | Колодка тормозная на погрузчик | Brake pad for loader | ZL50E-II-001/Changlin 956, ZLM50E-5 | 10 |
| 349 | Муфта включения | Switching coupling | Z50B.2.1-3 | 1 |
| 350 | Муфта включения | Switching coupling | Z50B.2.1-30 | 1 |
| 351 | Ремкомплект гидроцилиндра опрокидывания ковша | Bucket Tipping Hydraulic Cylinder Repair Kit | zlm50E-5 | 1 |
| 352 | Ремкомплект гидроцилиндра подъема стрелы | Boom Lifting Hydraulic Cylinder Repair Kit | zlm50E-6 | 1 |
| 353 | Ремкомплект гидроцилиндра рулевого | Steering cylinder Repair kit | zlm50E-5 | 1 |
| 354 | Ремкомплект суппорта тормозного | Brake Caliper Repair Kit | Z30.6.3B-RKT | 1 |
| 355 | Сальник | Oil seal | 50*80*12/B-G09877A-00023 | 6 |
| 356 | Фильтр гидравлический | Hydraulic filter | Z50B.14.21-4 | 5 |
| 357 | Фильтр гидравлический | Hydraulic filter | Z50E.14.1.3 | 5 |
| 358 | Фильтр трансмиссии | Transmission filter | W-15-00057 | 6 |
| 359 | Вал насоса КПП | Gearbox pump shaft | Z55S030000002T9 | 1 |
| 360 | Муфта резиновая | Rubber coupling | Z35F0105021B | 2 |
| 361 | Насос КПП | Gear Shift Pump | Z50E0301 | 1 |
| 362 | Ремкомплект суппорта | Caliper Repair Kit | CG50.6.2-10+CG50.6.2-9 | 1 |
| 363 | Суппорт тормозной | Brake caliper | Z5EII0501 | 4 |
| 364 | Вал | Shaft | 154-13-41651 | 1 |
| 365 | Вал | Shaft | 154-13-51650 | 1 |
| 366 | Вал | Shaft | 175-30-34210 | 1 |
| 367 | Вал карданный | Cardan shaft | ZL50G3-04004/81Z130011 | 1 |
| 368 | Вал карданный | Cardan shaft | ZL30GII-04400 | 1 |
| 369 | Вал карданный задний | Rear cardan shaft | ZL50G3-04001 | 1 |
| 370 | Вал карданный передний | Front cardan shaft | ZL30GII-04200 | 1 |
| 371 | Вал карданный передний | Front cardan shaft | ZL50G3-04009 | 1 |
| 372 | Вал натяжения гусеницы | Caterpil. tension shaft | 16L-40-62000 | 1 |
| 373 | Вал сателита | Satellite Shaft | 154-15-42521 | 1 |
| 374 | Вал шестерня | Shaft gear | 154-27-11327 | 1 |
| 375 | Венец зубчатый фрикционов КПП | Gear ring of gearshift clutches | 16Y-15-00004 | 1 |
| 376 | Водило с сателитами в сборе №2 (среднее) | Driver No. 2 (medium) with satellites assembled | 154-15-42321T | 1 |
| 377 | Водило сателлитов | Satellite driver | 16Y-15-00006 | 1 |
| 378 | Втулка (направляющая) | Bushing (guide) | 154-30-12170 | 4 |
| 379 | Втулка | Bushing 2 | 14Y82-00016/16Y80-30006/16L80-00007 | 4 |
| 380 | Втулка | Bushing 12 | 60*70*20/DG930A-09010A | 4 |
| 381 | Втулка | Bushing 13 | DG930A-09003A/60*70*39 | 4 |
| 382 | Втулка | Bushing 14 | ZL30GII-11004/50*70*100 | 4 |
| 383 | Втулка | Bushing 15 | ZL30GII-11007A/70*90*120 | 4 |
| 384 | Втулка балансира | Balancer bushing 1 | 16Y-31-00001 | 4 |
| 385 | Втулка балансира | Balancer bushing 2 | ZL50G2-10005 | 4 |
| 386 | Втулка сочленения верхняя | Upper joint bushing | ZL50G2-09006 | 2 |
| 387 | Втулка ковша верхняя | Bucket upper sleeve | ZL50G2-11000-5 | 4 |
| 388 | Втулка ковша нижняя | Bucket bottom sleeve | ZL50G2-11000-3 | 4 |
| 389 | Втулка конической передачи | Conical Transmission Bushing | 16Y-16-00021 | 4 |
| 390 | Втулка полуоси | Half-axle bushing 1 | 16Y-18-00006 | 4 |
| 391 | Втулка полуоси | Half-axle bushing 2 | 16Y-18-01000 | 4 |
| 392 | Гайка | Nut bolt | 16Y-80-00008 | 6 |
| 393 | Гайка полуоси | Axle nut | 16Y-18-00031 | 6 |
| 394 | Гайка ступицы | Hub Nut | ZL60D.24.1-11 | 6 |
| 395 | Генератор | Generator | 612630060248 | 2 |
| 396 | Генератор | Generator | C6121/6N9294/5C9088 | 2 |
| 397 | Гидротрансформатор (Конвертер) | Torque Converter (Converter) | 16Y-11-00000/YJ380 | 1 |
| 398 | Головка блока цилиндров в сборе | Cylinder head assembly | 3418684/3418529 | 1 |
| 399 | Головка блока цилиндров ДВС (НЕ В СБОРЕ) | Engine cylinder head (NOT ASSEMBLED) | 7N8866 | 1 |
| 400 | Диск КПП (поршень) | Gearbox disc (piston) | 16Y-15-00026 | 2 |
| 401 | Диск нажимной | Push disk | 16Y-16-01002 | 2 |
| 402 | Диск фрикционный | Friction disc | 16Y-16-00010 | 10 |
| 403 | Диск фрикционный | Friction disc | 16Y-16-02000 | 10 |
| 404 | Диск фрикционный КПП | Friction gearbox disc | 16Y-15-09000 | 10 |
| 405 | Диск фрикционный КПП | Friction gearbox disc | 175-15-12713 | 10 |
| 406 | Доукон малый (КОМПЛЕКТ) | Doukon Small (SET) | 198-30-16612+170-27-12340 | 5 |
| 407 | Зуб боковой правый (правый) | Right lateral tooth (right) | ZL50G2-11100-2Y | 4 |
| 408 | Кардан (муфта в сборе) | Cardan (coupling assembly) | 175-20-30000 | 1 |
| 409 | Клаксон | Klaxon | D2711-10500/D2700-10500 | 3 |
| 410 | Клапан ГТР | Torque Converter Valve | 16Y-11-30000 | 1 |
| 411 | Клапан регулировки давления | Pressure control valve | 154-49-51100 | 1 |
| 412 | Клапан редукционный главный в сборе | Main pressure reducing valve assembly | 701-30-51002 | 1 |
| 413 | Кольца поршневые (комплект 18 шт.) | Piston rings (set of 18 pcs.) | (3082580+3103159+3012332+3103157)/3803471/3801755 | 2 |
| 414 | Кольца поршневые (КОМПЛЕКТ) | Piston rings (SET) | 4058967+4058968+4058969 | 2 |
| 415 | Кольцо | Ring | 07018-12605/004904015A0201750 | 3 |
| 416 | Кольцо круглого сечения | Circular ring | 07000-02145 | 10 |
| 417 | Кольцо круглого сечения | Circular ring | 07000-05145 | 10 |
| 418 | Кольцо круглого сечения | Circular ring | 07000-05280 | 10 |
| 419 | Кольцо уплотнительное (цвет.мет) | Sealing ring (non-ferrous metal) | 07018-12205 | 2 |
| 420 | Кольцо уплотнительное (цвет.мет) | Sealing ring (non-ferrous metal) | 154-15-49260 | 2 |
| 421 | Кольцо уплотнительное | Sealing ring | 07018-12455 | 3 |
| 422 | Корпус | Body | 16Y-15-00076 | 1 |
| 423 | Корпус в ГТР | Housing in the torque converter | 234-13-11211 | 1 |
| 424 | Крестовина карданного вала | Cardan shaft crosspiece | SD16 16Y-12-00100 | 5 |
| 425 | Кронштейн сварной правый | Right welded bracket | 16Y-40-19100 | 1 |
| 426 | Крышка подшипника (левого) | Bearing cover (left) | 16Y-16-06000 | 1 |
| 427 | Крышка подшипника (правого) | Bearing cover (right) | 16Y-16-05000 | 1 |
| 428 | Насос трансмиссии | Transmission pump | 07433-71103 | 1 |
| 429 | Опора промежуточная | Intermediate support | ZL50G2-04303/ZL50G2-04304/ZL50G2-04302 | 1 |
| 430 | Палец | Finger | ZL30GII-11002 | 2 |
| 431 | Палец | Finger | ZL30GII-11700 | 2 |
| 432 | Палец | Finger | ZL30GII-11800 | 2 |
| 433 | Палец | Finger | ZL50G2-09300 | 2 |
| 434 | Палец | Finger | ZL50G2-11010D | 2 |
| 435 | Палец гидроцилиндра подъема стрелы | Boom lifting hydraulic cylinder finger | ZL30GII-11600 | 2 |
| 436 | Палец ковша верхний | Bucket upper finger | ZL50G2-11600/80*265 | 2 |
| 437 | Палец ковша нижний | Bucket bottom finger | 70*250/ZL50G2-11500 | 2 |
| 438 | Подшипник | Bearing | C4G2213 | 2 |
| 439 | Подшипник КПП игольчатый | Gearbox needle bearing | 16Y-15-01000/SD16 | 2 |
| 440 | Полукольца | Half – rings | 7N9342/C06AL-1003652+A/4110000186070 | 2 |
| 441 | Полуось | Half – axis | 16Y-18-00001 | 1 |
| 442 | Реле выключателя (масса аккумулятора) | Switch relay (battery weight) | D2600-60000 | 1 |
| 443 | Ремкомплект КПП | Gearbox repair kit | 154-15-01000/SD22 | 2 |
| 444 | Сальник | Oil seal | 07013-00090/07013-10090 | 5 |
| 445 | Сальник вала КПП | Gearbox shaft seal | 16Y-15-11000 | 5 |
| 446 | Статор/ходовое колесо в ГТР | Stator/running wheel in the torque converter | SD22 154-13-42110 | 1 |
| 447 | Ступица | Hub | 158-18-00002 | 1 |
| 448 | Ступица | Hub | 16Y-16-03001 | 1 |
| 449 | Тормоз ленточный в сборе | Belt brake assembly | 16Y-17-04000 | 1 |
| 450 | Трубка | A tube | 209958-20/209958 | 1 |
| 451 | Трубка | A tube | 4914213-20/4914213 | 1 |
| 452 | Трубки топливные | Fuel tubes | 26AB201+26AB202+26AB203 | 1 |
| 453 | Турбина конвертера | Converter Turbine | 16Y-11-00001 | 1 |
| 454 | Турбинное колесо в ГТР | Turbine wheel in the torque converter | 154-13-41510/SD22 | 1 |
| 455 | Фланец | Flange | 16Y-15-00009 | 1 |
| 456 | Фланец | Flange | 175-27-31463 | 1 |
| 457 | Фланец | Flange | DG930A-09002A | 1 |
| 458 | Фланец | Flange | DG930A-09007 | 1 |
| 459 | Фланец | Flange | DG930A-09008 | 1 |
| 460 | Фланец шарнира карданного в ГТР | The flange of the cardan joint in the torque converter | 16Y-11-10000 | 1 |
| 461 | Цилиндр | Cylinder | 154-30-11141 | 1 |
| 462 | Шестерня (сателит) | Gear (satellite) | 154-15-42420 | 2 |
| 463 | Шестерня | Gear | 154-15-32490 | 1 |
| 464 | Шестерня | Gear | 154-27-11314/154-27-11313 | 1 |
| 465 | Шестерня | Gear | 16Y-11-00008 | 1 |
| 466 | Шестерня | Gear | 16Y-15-00028 | 1 |
| 467 | Шестерня | Gear | 16Y-18-00036 | 1 |
| 468 | Шестерня ТНВД | Fuel pump gear | C07AB-1064497+B | 1 |
| 469 | Шпилька (ключ) | Hairpin (key) | 154-27-11330 | 3 |
| 470 | Гидроцилиндр рулевой | Steering hydraulic cylinder | DG958-05200 | 1 |
| 471 | Блок фрикционов (муфта) | Friction block (clutch) | 4644251042 | 1 |
| 472 | Гайка | Nut bolt | 0637006018 | 10 |
| 473 | Джойстик | Joystick | 6006 040 002/6006040002/4110000367002 | 1 |
| 474 | Диск фрикционный | Friction disc | 769129011 | 10 |
| 475 | Диск фрикционный | Friction disc | 0769129022 | 10 |
| 476 | Диск фрикционный | Friction disc | 4642308330/4110000076068/7200001650 | 10 |
| 477 | Диск фрикционный | Friction disc | 4642308331/4110000076107 | 10 |
| 478 | Диск фрикционный | Friction disc | 4642308332/4110000076069/7200001651 | 10 |
| 479 | Диск фрикционный SP100006/0501309329/4110000076159/7200001649 | Friction disc | SP100006 | 10 |
| 480 | Колодка комплект | Pad Kit | 0501003821/0501003819 | 3 |
| 481 | Кольцо | Ring | 0634303118 | 10 |
| 482 | Кольцо | Ring | 0634303466 | 10 |
| 483 | Кольцо | Ring | 0634306287 | 5 |
| 484 | Кольцо | Ring | 0634306523 | 10 |
| 485 | Кольцо | Ring | 0634313529/57×3/ZFN744 | 10 |
| 486 | Кольцо | Ring | 0769124115/0730513180 | 5 |
| 487 | Кольцо стопорное | Locking ring | 0630502048/7200001508 | 5 |
| 488 | Кольцо стопорное | Locking ring | 0630502048/7200001508 | 5 |
| 489 | Пластина стопорная | Locking plate | 4644330006 | 5 |
| 490 | Подшипник игольчатый | Needle bearing | 0635303204 | 2 |
| 491 | Подшипник игольчатый | Needle bearing | 0735358069 | 2 |
| 492 | Подшипник игольчатый | Needle bearing | 0750115109/45х53х27.8 | 2 |
| 493 | Подшипник игольчатый | Needle bearing | 0750115182 | 2 |
| 494 | Поршень | The piston | 4642308185 | 3 |
| 495 | Прокладка | Pad | 4644311209 | 3 |
| 496 | Пружина | Spring | 0732041226 | 5 |
| 497 | Ролик | Roller | 0750119048 | 2 |
| 498 | Рукав клапана | Valve sleeve | 4644320042 | 2 |
| 499 | Соединение гибкое (КОМПЛЕКТ 2 ШТ.) | Flexible connection (SET OF 2 PCS.) | 4644230239+4644330239 | 2 |
| 500 | Фланец | Flange | 4644303815 | 1 |
| 501 | Фланец | Flange | YD13302001 | 1 |
| 502 | Шайба | Puck | 4627303027 | 2 |
| 503 | Шайба проставочная пластиковая | Plastic spacer washer | 0730150777/7200001626 | 2 |
| 504 | Шайба регулировочная | Adjusting washer | 769120468 | 10 |
| 505 | Шестерня | Gear | 4644252016/4644352010 | 1 |
| 506 | Шпилька | stud | 0636610014A | 10 |
| 507 | Шпилька | stud | 0636610014B | 10 |
| 508 | Шпонка | Key | 0631501052/A6x4x28/7200001492 | 10 |
| 509 | Шпонка | Key | A6×6×28/DIN6885/0631501514 | 10 |
| 510 | Вал карданный передний подвесной | Front suspension cardan shaft | 41C0120 | 1 |
| 511 | Втулка | Bushing | 130*130*110/55A0411 | 4 |
| 512 | Диск колесный | Wheel drive | H=550 D=760 51C0031/SP116324 | 1 |
| 513 | Крышка планетарного мех. | Planetary Gear Cover | 53A0009/ZL50C.2-21 | 1 |
| 514 | Опора промежуточная | Intermediate support | 41C0038 | 1 |
| 515 | Палец | Pin | 75*305/11D0793 | 2 |
| 516 | Палец | Pin | 90*230/11D0044/ZL50CI.11.2 | 2 |
| 517 | Палец | Pin | 90*240/11D0066 | 2 |
| 518 | Палец рулевого цилиндра | Steering cylinder pin | 90*290/11D0792 | 2 |
| 519 | Палец рулевого цилиндра | Steering cylinder pin | 60A2099 | 2 |
| 520 | Патрубок нижний | Lower branch pipe | 32A0109 | 2 |
| 521 | Подушка кабины | Cabin cushion | 35C0156 | 2 |
| 522 | Полуось | Half – axis | 62A0065 | 1 |
| 523 | Редуктор переднего моста | Front axle gearbox | 41C0605/41C0086/41C0086X1T0/41C0086X2T0/41C0605X1 | 1 |
| 524 | Реле сигнала поворота | Turn signal relay | 31B0018/SG253 | 2 |
| 525 | Ремкомплект гидроцилиндра опрокидывания | Tipping Hydraulic Cylinder Repair Kit | SP102915 | 2 |
| 526 | Ремкомплект для трансмиссии | Repair kit for transmission | SP103882/S/ZL50C.6 | 2 |
| 527 | Фильтр гидравлический | Фильтр гидравлический | 53C0021 | 5 |
| 528 | Болт крепления моста задний | Rear axle mounting bolt | 404003D/M30x1.5, L=110 CDM855 | 6 |
| 529 | Болт крепления моста передний | Front axle mounting bolt | 504003C/M30*1.5, l-145 CDM 855 | 6 |
| 530 | Вал карданный передний | Front cardan shaft | LG30F.04I.02/CDM 833 (304100d) | 1 |
| 531 | Вал карданный средний/задний | Вал карданный средний/задний | LG855.04.04/CDM 855 (LG50F.04203A) | 1 |
| 532 | Вал карданный верхний | Upper cardan shaft | YZ18JF.4.2A/CDM520 | 1 |
| 533 | Вал карданный задний/средний | Rear/middle cardan shaft | LG855.04.03/CDM855 | 1 |
| 534 | Вал карданный нижний | Lower cardan shaft | LG520A6.04.01 | 1 |
| 535 | Вал первой передачи в сборе | First gear shaft assembly | LG30.5.1/ZL30E.5.1/CDM833 | 1 |
| 536 | Вал первой передачи в сборе | First gear shaft assembly | CDM855 403100 | 1 |
| 537 | Втулка рычага управления ковшом | Bucket control lever sleeve | CDM855/856 LG50F.11015/120*140*106 | 4 |
| 538 | Втулка | Bushing | 55*72*70/LG50F.11032A | 4 |
| 539 | Втулка соединения рамы верхняя | Upper frame connection sleeve | LG30F.10 I-004/60*70*45*90 | 4 |
| 540 | Втулка нижняя рычага подъема стрелы | The lower sleeve of the boom lifting lever | LG843.11-007/511003/60916010019/CDM833/843/65*80*90 | 4 |
| 541 | Втулка сочленения нижняя | Joint bushing lower | CDM855 LG853.10-002 (LG50E.10010A)/75*85*65 | 4 |
| 542 | Втулка сочленения нижняя | Joint bushing lower | LG30F10I-009 | 4 |
| 543 | Выключатель стоп-сигнала (лягушка) | Brake light switch (frog) | 55C0039 | 3 |
| 544 | Диск фрикциона с внешними зубами | Clutch disc with external teeth | ZL30E.10.5.1-6/4110000218036/55C0039/853.15.30/JN150/46C0039/6040502006/803604504/ CDM833 | 10 |
| 545 | Диск фрикционный | Friction disc | 403505-506/ZL40A.30.1.1A-2/P-04-04-126/36C0002/LG853.03.01.05.01 | 5 |
| 546 | Диск фрикционный ведущий КПП | Friction drive drive gearbox | ZL30E.5.1-12 | 5 |
| 547 | Зуб ковша погрузчика боковой | Loader side bucket tooth | LG50F.11132B/CDM855 | 4 |
| 548 | Клапан поставки масла | Oil supply valve | CDM855E/843 WYF-65 LG50EX.07.11.04 | 1 |
| 549 | Кольцо | Ring | ZL30D-11-08/4110000084048 | 4 |
| 550 | Кольцо | Ring | ZL30D-11-19 | 4 |
| 551 | Кольцо уплотнительное | Sealing ring | D=40 CDM833 ZL30E.5.1-7 | 4 |
| 552 | Крышка подшипника сочленения | Joint Bearing Cover | d=86, D=180, CDM 510013C (LG50E.10007A) LG853.10-005 | 1 |
| 553 | Насос гидравлический сдвоенный 14 шлицов | Hydraulic double pump 14 slots | CBG2080/CDM833 | 1 |
| 554 | Отопитель кабины | Cabin heater | 6041080016\LG853.15.29 | 1 |
| 555 | Палец рукояти | Handle pin | LG833.11.06/LG30F.11.06(311010D)/CDM833/80*346 | 2 |
| 556 | Палец | pin | LG833.10V.04/65*230 | 2 |
| 557 | Палец сателлита | Satellite Pin | LG50F.04409A | 2 |
| 558 | Патрубок интеркуллера с ТРУБКОЙ | Intercooler pipe with TUBE | 612600111826/d=98, D=110, l=290 CDM855 | 2 |
| 559 | Патрубок радиатора (уголок) | Radiator nozzle (corner) | 612600160028/CDM855 | 2 |
| 560 | Педаль тормоза с тормозным клапаном | Brake pedal with brake valve | LG856.08.07/CDM853/856D | 1 |
| 561 | Редуктор по часовой передний | Gearbox clockwise front | LG30F.04300A | 1 |
| 562 | Ремкомплект гидроцилиндра ковша | Bucket Hydraulic Cylinder Repair Kit | CDM 855 (110*125) | 1 |
| 563 | Ремкомплект КПП (сальники) | Gearbox repair kit (oil seals) | CDM833/CDM835 | 2 |
| 564 | Ремкомплект цилиндра подъема стрелы | Boom Lifting Cylinder Repair Kit | 90×105/ZL50C | 2 |
| 565 | Рычаг ковша | Bucket lever | CDM833 LG30F.11.02 | 1 |
| 566 | Сальник | Oil seal | 4120000558012/HG4-339-66/55*80*12 CDM833 | 10 |
| 567 | Сальник | Oil seal | 403101/70*78*5 CDM843/855 | 10 |
| 568 | Сателлит бортового редуктора 18 зубьев | Satellite of the on-board gearbox 18 teeth | 404020/D=127.4, d=54.6 CDM855 | 2 |
| 569 | Стеклоочиститель с держателем большой длина 70мм | Wiper with holder large length 70 mm | CDM855 | 1 |
| 570 | Фильтр гидравлический | Hydraulic filter | 307525-527D/CDM833/LG833 | 5 |
| 571 | Шайба бортового редуктора | Side gear washer | 404025/60203100367/860115703 | 5 |
| 572 | Шестерня ведомая | Driven gear | YJ315L-00006 | 1 |
| 573 | Бендикс стартера | Starter bendix | А70-3708010В YC6108G | 1 |
| 574 | Клапан электромагнитный остановки двигателя | Electromagnetic engine stop valve | A7019-1115100 | 1 |
| 575 | Колпачок маслосьемный | Oil-removing cap | M6600-1003105 | 12 |
| 576 | Кольцо гильзы цилиндра (1 шт) | Кольцо гильзы цилиндра (1 шт) | A3000-1002063/SP106197/SP106810/SP140709 | 5 |
| 577 | Кольцо гильзы цилиндра КОМПЛЕКТ (12 шт.) | Cylinder Liner Ring SET (12 pcs.) | A3000-1002063/SP106197/SP106810/SP140709 | 5 |
| 578 | Насос масляный | Oil pump | D30-1011100 | 2 |
| 579 | Насос масляный | Oil pump | 1AQ000-1011100A/YCD4R11G | 2 |
| 580 | Патрубок радиатора нижний | Radiator pipe lower | B7648-1303002, B76481303002 | 2 |
| 581 | Прокладка поддона картера | Sump pallet gasket | J3200-1009012/4110000561221/1640H-1009000 | 3 |
| 582 | ТНВД | High pressure Fuel pump | D7002-1111100 | 1 |
| 583 | Турбокомпрессор | Turbocharger | JP60C1G302-1118100-502 | 1 |
| 584 | Болт ГБЦ двигателя Deutz | Cylinder head bolt of the Deutz engine | 13054119, 13037377, 4110000054230, 12200620/TD226B-6/WP6G125E22 | 60 |
| 585 | Болт шатунный | Connecting rod bolt | 12167047/4110000054126, W010250040/SP105397 | 60 |
| 586 | Маслозаборник Deutz | Deutz oil intake | 13020429 | 3 |
| 587 | Ремкомплект прокладок ДВС | Repair kit of internal combustion engine gaskets | WP6G125 | 15 |
| 588 | Термостат для двигателей | Thermostat for engines | 13061335 4110002989034/TD226В (DEUTZ), WP4, WP6 | 10 |
| 589 | Фильтр топливный тонкой очистки | Fuel fine filter | 13020488, 7200002385, CX0712B/Deutz TD226 LG936 | 500 |
| 590 | Втулка | Bushing | 54A0008/ZL50C.11-11/63х75х110 LiuGong | 10 |
| 591 | Втулка пальца ковша | Bucket finger Sleeve | 55A0281/ZL30.11-2/CLG836 LiuGong/63х75х70 | 10 |
| 592 | Втулка | Bushing | 54A0006/ZL50C.11-7/75х87х80 LiuGong | 5 |
| 593 | Ремкомплект гидроцилиндра опрокидывания | Tipping Hydraulic Cylinder Repair Kit | SP100595/S/ZL30.10.2/LiuGong | 3 |
| 594 | Ремкомплект гидроцилиндра подъема | Hydraulic Lifting Cylinder Repair Kit | SP100594/S/ZL30.10.1/d=70 LiuGong | 5 |
| 595 | Ремкомплект суппорта | Caliper Repair Kit | rk-45C0004/ZL50C.2.2/LiuGong | 50 |
| 596 | Фильтр гидравлический | Hydraulic filter | 53C0015/SFM-829/LiuGong | 10 |
| 597 | Пара главная редуктора переднего моста 37зубьев/8зубев/19 шлицов | A pair of front axle main gear 37 teeth/8 teeth/19 slots | 43A0148/43A0129/SP113474/LiuGong | 2 |
| 598 | Болт с гайкой крепления бокового зуба | Bolt with nut for fixing the side tooth | 4043000337/4013000016/(M16*40) LG933, LG936 | 30 |
| 599 | Вал карданный средний | Cardan shaft medium | 2050900053/LG936 | 1 |
| 600 | Вал с шестерней привода насоса диаметр 34 мм, 6 шлицов, 42 зубьев | Shaft with pump drive gear diameter 34 mm, 6 slots, 42 teeth | 3030900094 | 4 |
| 601 | Вентилятор кабины | Cabin fan | 4190000608/LG933, LG936 | 4 |
| 602 | Втулка пальца балансира | The bushing of the balancer finger | 3110900006, 29270007831, 915100005/LG930-1, LG933, LG936/50х62х36 | 10 |
| 603 | Втулка стрелы центральная (соед с цилиндром) | Central boom sleeve (connection to the cylinder) | 4043000121/LG 933, 936/60х75х50 | 15 |
| 604 | Втулка пальца ковша | Bucket finger Sleeve | 4043000218, 4120000867011/4120000868008/LG933, LG936/60х75х58 | 30 |
| 605 | Втулка пальца стрелы нижняя | Boom finger lower sleeve | 4043000026, 29160000021/LG 952/80х95х90 | 20 |
| 606 | Втулка маятника (рокера) центральная | The hub of the pendulum (rocker) is central | 4043000124/LG 933, 936/85х100х125 | 10 |
| 607 | Гайка нижнего пальца сочленения передней полурамы | Nut of the lower finger of the articulation of the front half frame | 29250001061/LG930-1, LG933, LG936(М28) | 20 |
| 608 | Гидроусилитель (Шлицевой) | Гидроусилитель (Шлицевой) | BZZ3-E125B | 2 |
| 609 | Датчик заднего хода | Reverse gear sensor | 4130001294/4130000278/4130001296/LG956 LG933L LG936L LG953 | 15 |
| 610 | Датчик температуры воды | Water temperature sensor | 4130001058 | 10 |
| 611 | Зуб ковша правый | Bucket tooth right | 29170036961/LG 933,936 | 20 |
| 612 | Колодка стояночного тормоза | Parking brake pad | 4120000087043/LG933/LG936 | 100 |
| 613 | Колодка тормозная | Brake pad | 4120001739016/LG 933, 936, 952, 953, 956, 968 | 300 |
| 614 | Колодка тормозная | Brake pad | 4120001827001/918 | 50 |
| 615 | Колодка тормозная прямоугольная | Rectangular brake pad | 4110000012013 | 200 |
| 616 | Крестовина карданного вала (L-153 мм, уши 71 мм, 8 отв) | Cardan shaft crosspiece (L-153 mm, ears 71 mm, 8 holes) | T160, G5-7126 | 20 |
| 617 | Крышка сапуна гидробака | Hydraulic tank breather cover | 4120001088/29100009991 | 5 |
| 618 | Мотор отопителя | Heater motor | 4190000160001/LG933/936 | 4 |
| 619 | Насос-дозатор (Гидроруль) | Metering pump (Hydraulic steering) | BZZ-800/4120001805/BZZ5-E800 LG 952, 953, 956 | 3 |
| 620 | Палец (коромысло-рама) | 100х245 | 2070900104/ ZL50.7.8A | 4 |
| 621 | Палец гидроцилиндра поворота | 40х118 | 29250001101 | 20 |
| 622 | Палец, без подошвы гидроцилиндра поворота передней полурамы | Finger, without the sole of the hydraulic cylinder turning the front half frame | 3110900011, 29250004081, 29270001121/LG930-1, 933, 936/40х124 | 20 |
| 623 | Палец, ухо стрелы центральный | Finger, arrow ear central | 4043000119/LG930-1, 933, 936/60х150 | 20 |
| 624 | Палец крепления подъемного цилиндра стрелы (у кабины) | Boom lifting cylinder mounting pin (at the cab) | 4043000110, 4043000205/LG 936/60х235 | 16 |
| 625 | Палец крепления стрелы к раме (у кабины) | Boom attachment finger to the frame (at the cabin) | 4043000111, 4043000204/LG 933, 936/65х235 | 6 |
| 626 | Палец сочленения тяги ковша с ковшом | Bucket thrust joint finger with bucket | 4043000346/70х170 | 10 |
| 627 | Палец стрелы центральный | Arrow central finger | 4043000014/LG952, 953, 956/85х215 | 6 |
| 628 | Палец маятника (рокера) стрелы | Finger of the pendulum (rocker) arrow | 4043000120/LG 933, 936/85х245 | 6 |
| 629 | Палец рокера ковша верхний | Bucket Rocker upper finger | 4043000060/LG 952, 953, 956, 958/85х265 | 6 |
| 630 | Ремкомплект ПГУ | Pneumatic hydraulic booster repair kit | 412000009001/LYG60A | 30 |
| 631 | Сальник пальца рабочего оборудования ковш-стрела, тяга-ковш, тяга-коромысло | Oil seal of the finger of the working equipment bucket-boom, thrust-bucket, thrust-rocker arm | 4043000059/9321672(128*150*12) | 50 |
| 632 | Сальник (железная обойма) пальца стрела-ковш, тяга-ковш, стрела-ГЦ стрелы | Oil seal (iron clip), arrow-bucket, thrust-bucket, arrow-hydraulic cylinder of the boom | 4043000127/LG930-1,933/60*75*8 | 60 |
| 633 | Суппорт тормозной | Brake caliper | 45C0004, 71A0018, ZL50C.2.2-8/LG944/LG946 | 25 |
| 634 | Суппорт тормозной | Brake caliper | 4120001739, ZL40LG09-ZDQ, 408100C, 4110000012 | 60 |
| 635 | Термостат уточка | Duckling thermostat | 615G00060016/4110000556085/71С ZL50G/WD615 | 10 |
| 636 | Трос газа | Gas cable | 2010900170/L=2300/956 | 6 |
| 637 | Фильтр гидравлический | Hydraulic filter | 29100004061/LG 936 | 20 |
| 638 | Фланец пальца сочленения полурам верхний | The flange of the joint finger is hollow upper | 29250004011/LG936 | 30 |
| 639 | Фланец пальца сочленения полурам нижний | The flange of the joint finger is hollow bottom | 29250004021/LG 936 | 30 |
| 640 | Шайба регулировочная (сочл палец-втулка) | Adjusting washer (pin-sleeve joint) | 4043000125/60*100*1 LG-933, 936 | 150 |
| 641 | Шайба регулировочная (сочл палец-втулка) | Adjusting washer (pin-sleeve joint) | 4043000198/65*140*2 LG-933, 936 | 20 |
| 642 | Шестерня сателлита | Шестерня сателлита | 3050900041 | 2 |
| 643 | Щетка с поводком очистителя ветрового стекла (под 2 шлицевых вала) | Brush with windscreen cleaner leash (under 2 spline shafts) | K936022004 | 30 |
| 644 | Колпачок маслосъёмный двигателя (ОРИГИНАЛ) | Engine oil removal cap (ORIGINAL) | D04-107-30+C/Shanghai D6114ZG2B | 60 |
| 645 | Привод вентилятора в сборе | Fan drive assembly | 16AZ009/C6121 | 1 |
|
US $2.38 / Piece | |
6 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | Internal Gear |
| Manufacturing Method: | Cast Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Stainless Steel |
###
| N/a | Name in Russian | Name in English | Article number | Qty |
| 1 | Болт полый | Hollow Bolt | 1119238 01119238/SP127284 | 5 |
| 2 | Генератор | Generator | 13031590 | 3 |
| 3 | Головка блока цилиндра в сборе | Cylinder head assembly | 13032055 | 12 |
| 4 | Датчик температуры | Temperature sensor | 612600090107/612600090107 | 6 |
| 5 | Держатель топливных фильтров | Fuel Filter Holder | 12189882-A/13028032 | 2 |
| 6 | Клапан задвижки топливного насоса | Fuel pump valve | TD226B-6-000 | 3 |
| 7 | Коллектор воздушный впуской | Air intake manifold | 13034462/4110000846072 | 1 |
| 8 | Коллектор впускной | Intake manifold | 13022552 | 1 |
| 9 | Коллектор выпуской | Exhaust manifold | 13057673 | 11 |
| 10 | Коромысло | Rocker arm | 12214103/13037791 | 12 |
| 11 | Крепление насоса водяного | Water pump mount block | 13025726/Deutz/TD226 | 1 |
| 12 | Крепление топливных трубок | Mounting of fuel tubes | 12165346 | 10 |
| 13 | Крепление топливных трубок | Mounting of fuel tubes | 12166451 | 10 |
| 14 | Патрубок | Branch pipe | 13033682 | 3 |
| 15 | Патрубок | Branch pipe | 13034046/4110000054257/4110001031038 | 3 |
| 16 | Патрубок системы охлаждения масла двигателя | Engine oil cooling system pipe | 13026006 | 3 |
| 17 | Патрубок тосола | Antifreeze nozzle | 12200696 | 3 |
| 18 | Поддон двигателя | Engine tray | 13036094 | 1 |
| 19 | Пробка поддона | Pallet Stopper | 13022897 | 10 |
| 20 | Прокладка адаптера водяного насоса | Water pump adapter gasket | 12158513/4110000054284/SP105131/W47070170 | 10 |
| 21 | Прокладка водяного насоса двигателя | Engine water pump gasket | 12270869/4110000054285/Weichai-Deutz | 10 |
| 22 | ТНВД | Fuel pump | 13051931/4110000846108 | 1 |
| 23 | Топливопровод | Fuel line | 13024894 | 2 |
| 24 | Трубка охлаждающей жидкости двигателя | Engine coolant tube | 13033390/4110000991012/W47002046 | 2 |
| 25 | Турбокомпрессор | Turbocharger | 13030175КН43/13030175 | 2 |
| 26 | Турбокомпрессор | Turbocharger | 13057501/12272277/K24A/13030850 | 2 |
| 27 | Фиксатор форсунки | Nozzle lock | 12159720 | 18 |
| 28 | Шестерня привода масляного насоса | Oil pump drive gear | 12189557/4110000054013/W010250790/SP128978 | 2 |
| 29 | Шкив коленвала ДВС | Crankshaft pulley of the internal combustion engine | 13032345 | 2 |
| 30 | Амортизатор капота | Hood shock absorber | 2120900570 | 20 |
| 31 | Амортизатор капота (L=480 мм) | Hood shock absorber (L=480 mm) | 29330011391 | 20 |
| 32 | Блок сателлитов бортового редуктора с шестернями (3 сателита) | On-board gearbox satellite unit with gears (3 satellites) | 29070018761 | 1 |
| 33 | Блок сателлитов бортового редуктора с шестернями | Satellite unit of the on-board gearbox with gears | 2907000765 | 1 |
| 34 | Болт | Pin | 01151569/Q150B0816 | 100 |
| 35 | Болт крепления переднего моста | Front axle mounting bolt | М30*110/29070001031 | 100 |
| 36 | Вал соеднительный КПП | Shaft connecting gearbox | 4110000160059 | 1 |
| 37 | Втулка | Bushing | 100*115*137/4043000419 | 6 |
| 38 | Втулка | Bushing | 29250009421 | 6 |
| 39 | Втулка | Bushing | 95*110*144/4043000320 | 6 |
| 40 | Втулка рулевого гидроцилиндра | Steering cylinder sleeve | 4120000560013/4120000560507 | 6 |
| 41 | Втулка рулевого гидроцилиндра | Steering cylinder sleeve | 4120001004406 | 6 |
| 42 | Гидрораспределитель | Hydraulic distributor | 4120000561/SD32-16 | 1 |
| 43 | Гидрораспределитель | Hydraulic distributor | 4120002278/YGDF32-18 | 1 |
| 44 | Гидротрансформатор (Конвертер) в корпусе | Torque converter (Converter) in the housing | 4110000084 | 1 |
| 45 | Гидроусилитель (Шлицевой) | Hydraulic booster (Splined) | BZZ3-E125B | 1 |
| 46 | Гидроцилиндр наклона | Tilt hydraulic cylinder | 4120000601/968 | 1 |
| 47 | Гидроцилиндр поворота | Hydraulic turning cylinder | 4120000560/LG953 | 1 |
| 48 | Гипоидная пара (против часовой) редуктора заднего моста | Hypoid pair (counterclockwise) of the rear axle gearbox | 21909005021 | 1 |
| 49 | Гипоидная пара (против часовой) | Hypoid pair (counterclockwise) | 29090001091/29090000081/3050900203 | 1 |
| 50 | Гипоидная пара (против часовой) | Hypoid pair (counterclockwise) | 3050900203 | 1 |
| 51 | Гипоидная пара (против часовой) | Hypoid pair (counterclockwise) | 21909004931 L | 1 |
| 52 | Гипоидная пара (по часовой) | Hypoid pair (clockwise) | 21909004931 R | 1 |
| 53 | Диск тормозной | Brake disc | 3090900009 LG946 | 2 |
| 54 | Диск тормозной | Brake disc | 918/29070010481 | 2 |
| 55 | Клапан гидрораспределителя | Hydraulic distributor valve | 4120001054001/D32.2A-00 | 1 |
| 56 | Колодка ручного тормоза (комплект 2 шт.) | Handbrake pad (set of 2 pcs.) | 4120000087044+4120000087043 | 10 |
| 57 | Колодка тормозная (квадратная) | Brake pad (square) | 918/ZL15.5.1/Z200266/7200000208 | 20 |
| 58 | Корпус сателитов бортового редуктора | On-board gearbox satellite housing | 29070007661/933/933L/936/936L/938/938L | 1 |
| 59 | Крышка топливного бака | Fuel tank cap | 4120001404 | 2 |
| 60 | Палец планетарной шестерни | PLANETARY GEAR PIN | 3050900043 | 4 |
| 61 | Патрубок радиатора ДЛИНА 850 ДИАМЕТР 45 ВНУТР | Radiator nozzle LENGTH 850 DIAMETER 45 INTERNAL | 02637/LG953 | 2 |
| 62 | Радиатор кондиционера кабины | Cabin air conditioner radiator | 4190001338 | 1 |
| 63 | Реле звукового сигнала | Audio signal relay | 4130000009001 | 5 |
| 64 | Ремкомплект гидроцилиндра ковша | Bucket Hydraulic Cylinder Repair Kit | 4120000868101/k9360300031/LG936 | 2 |
| 65 | Ремкомплект гидроцилиндра подъёма стрелы | Boom Lifting Hydraulic Cylinder Repair Kit | k9360300041/LG936 | 2 |
| 66 | Ремкомплект гидроцилиндра подъёма стрелы | Boom Lifting Hydraulic Cylinder Repair Kit | 918/4120001153001 | 2 |
| 67 | Ремкомплект рулевого гидроцилиндра | Steering cylinder Repair kit | 4120001004007/936 | 2 |
| 68 | Сальник | Oil seal | 80*105*10/4043000256 | 10 |
| 69 | Трос переключения скоростей в сборе (длина 1840мм) | Gearshift cable assembly (length 1840 mm) | 4190000393/1 | 5 |
| 70 | Трос управления гидравликой (1740 мм) | Hydraulic control cable (1740 mm) | 29120010971-1 | 5 |
| 71 | Трубка смазки | Lubrication tube | 29270017601 | 3 |
| 72 | Трубка тормозная заднего моста левая | Rear axle brake tube left | 29220004161 | 3 |
| 73 | Трубка тормозная заднего моста правая | Rear axle brake tube right | 29220004171/УТ000015881 | 3 |
| 74 | Трубка тормозная переднего моста левая | Front axle brake tube left | 29220004131 | 3 |
| 75 | Трубка тормозная переднего моста правая | Front axle brake tube right | 29220004121 | 3 |
| 76 | Указатель давления воздуха | Air pressure indicator | 4130000858 | 3 |
| 77 | Указатель уровня топлива | Fuel level indicator | 4130000209/4130000235/4120000082 | 3 |
| 78 | Фильтр всасывающей магистрали | Suction line filter | 29100010291 | 3 |
| 79 | Фильтр сапуна КПП | Gearbox Breather Filter | 4120005390 | 5 |
| 80 | Фильтр топливного бака-ТОПЛИВОЗАБОРНИК | Fuel tank filter-FUEL INTAKE | 29020008421/958L | 2 |
| 81 | Фонарь задний | Rear light | 4130000270/4130000213 | 6 |
| 82 | Шайба регулировочная | Adjusting washer | 4043000151/60*130*2/4043000151-2 | 50 |
| 83 | Шпонка | Key | 4090000008/GB308-9.525-GCr15 | 10 |
| 84 | Штифт | Pin | 4016000113 | 10 |
| 85 | Вал коленчатый двигателя | Crankshaft of the engine | 13032128/13032128+001/4110000909105/12272496/Deutz WP6G125 | 3 |
| 86 | Держатель ролика | Roller Holder | 13020864/Deutz/TD226B-6G | 4 |
| 87 | Поршневая группа двигателя | Engine piston group | 13020377/Deutz/TBD226B-6D | 1 |
| 88 | Прокладка крышки клапанов двигателя | Engine valve cover gasket | 12270879/Deutz/TD226B-6/WP6G125E22 | 200 |
| 89 | Поршень | Piston | 612600030015/D=126 G2-II/CDM 855/WD615 LonKing | 6 |
| 90 | Болт с гайкой крепления бокового зуба | Bolt with nut for fixing the side tooth | 4043000337/4013000016/(M16*40)/LG933, LG936 | 20 |
| 91 | Вал с шестерней привода насоса диаметр 34 мм, 6 шлицов, 39 зубьев | Shaft with pump drive gear diameter 34 mm, 6 slots, 39 teeth | 29050016421 | 1 |
| 92 | Вал с шестерней привода насоса диаметр 34 мм, 6 шлицов, 42 зубьев | Shaft with pump drive gear diameter 34 mm, 6 slots, 42 teeth | 3030900094 | 1 |
| 93 | Втулка пальца маятника центральная | Pendulum finger central sleeve | 3070900431/LG 952/100x120x110 | 6 |
| 94 | Главная пара заднего моста 7/37 левая (23 шлица, L хвостовика 330 мм) | Main pair of rear axle 7/37 left (23 slots, L shank 330 mm) | 2909000008/2909000007/LG956 | 2 |
| 95 | Зуб ковша правый | Bucket tooth right | 29170036961/LG 933,936 | 10 |
| 96 | Колодка стояночного тормоза | Parking brake pad | 4120000087043/LG933/LG936 | 40 |
| 97 | Мотор отопителя | Heater motor | 4190000160001/LG933/936 | 2 |
| 98 | Насос-дозатор (Гидроруль)(шпонка) | Metering pump (Hydraulic steering)(key) | 250100112/BZZ-125/BZZ3-E125/W083200000B | 2 |
| 99 | Палец 85х245 маятника (рокера) стрелы | Pin 85×245 pendulum (rocker) arrows | 4043000120/LG 933,936 | 5 |
| 100 | Палец 95х250 крепления подъемного цилиндра (у кабины) | Pin 95×250 mounting the lifting cylinder (at the cabin) | 4043000017/LG 952, 953, 956 | 6 |
| 101 | Ремкомплект ПГУ | Pneumatic hydraulic booster repair kit | LG40A-XLB/LG40A | 10 |
| 102 | Ремкомплект ПГУ | Pneumatic hydraulic booster repair kit | 412000009001/LYG60A | 20 |
| 103 | Сальник (железная обойма) пальца тяга-ковш, тяга-коромысло | Oil seal (iron clip), thrust-bucket, thrust-rocker arm | 4043000056/LG952/LG-953/85*100*8 | 30 |
| 104 | Сальник NSK | Oil seal NSK | 75*100*12 | 15 |
| 105 | Щетка с поводком очистителя ветрового стекла (под 2 шлицевых вала) | Brush with windscreen cleaner leash (under 2 spline shafts) | K936022004 | 20 |
| 106 | Каток двубортный | Skating rink double-breasted | 16Y-40-10000/SD16 | 2 |
| 107 | Радиатор масляный | Oil radiator | 4061161/SD22 SHANTUI | 1 |
| 108 | Блок цилиндров двигателя | Engine cylinder block | 330-1002170, 330-1002015A, 330-1002114, B7615-1002000/Yuchai YC6B125/YC6108 | 1 |
| 109 | Вилка переключения высокой и низкой передач | High and low gear shift fork | 860114724/ZL20-030048/4110000038315/860114724/LW300FN | 2 |
| 110 | Гидротрансформатор | Torque converter | 800351249/LW300FN | 2 |
| 111 | Клапан выпускной двигателя | Engine exhaust valve | 330-1007012C, 330-1007012, 330-1007012C, D30-1003103B/Yuchai YC6B125/YC6108 | 12 |
| 112 | Палец рулевого цилиндра | Steering cylinder pin | 251400276/251702703/40*140 | 20 |
| 113 | Палец балансира заднего моста (вилка) | Rear axle balance pin (fork) | 250100212/Z3.8.5/250100212/Z3.8.5/50*145 | 10 |
| 114 | Палец вилка (рама гц ковша) | Pin fork (bucket hydraulic cylinder frame) | Z5G.6.21/251400270/80*240 | 6 |
| 115 | Трубка топливная (обратка форсунок) двигателя | Fuel tube (return of injectors) of the Yuchai engine | 695-1104040, B7604-1104040A/YC6B125/YC6108/Yuchai | 1 |
| 116 | Шайба медная форсунки двигателя | Copper washer of the engine nozzle | 630-1112001-1.2, 630-1112001, 4110001026098, 4110000560089/Yuchai YC6B125/YC6108 | 100 |
| 117 | Палец | Pin | 11D0001/ZL50C.11.2/90×195 LiuGong | 4 |
| 118 | Блок сателлитов бортового редуктора в сборе с сателитами | Satellite unit of the on-board gearbox assembly with satellites | 83513206 | 1 |
| 119 | Болт гайки ступицы | Hub Nut Bolt | 83319015 | 10 |
| 120 | Болт крепления переднего моста в сборе с гайкой | Front axle mounting bolt assembly with nut | 805002107+805201458/LW300F | 20 |
| 121 | Болт крепления подвески заднего моста в сборе с гайкой | Rear axle suspension mounting bolt assembly with nut | 805000671+805201458/M24*2*220 L=21/LW300F | 10 |
| 122 | Болт крепления моста с гайкой | Bridge mounting bolt with nut | ZL50E.6-9/М30/ZL50E.6-9/250400522 | 10 |
| 123 | Болт среднего ножа с гайкой | Middle knife bolt with nut | GB10-88 M16*50 | 50 |
| 124 | Вал карданный | Cardan shaft | 103040002 | 1 |
| 125 | Вал карданный | Cardan shaft | 103040011(7207-577A)GR215/10304002 | 1 |
| 126 | Вал карданный | Cardan shaft | 103040037(PY132L(450)GR215 | 1 |
| 127 | Вал карданный | Cardan shaft | 103040038/(PY132J) GR215 | 1 |
| 128 | Вал карданный | Cardan shaft | 800300191 | 1 |
| 129 | Вал карданный | Cardan shaft | Z3G.4.1-1/252700128/350K.032 | 1 |
| 130 | Вал карданный задний | Rear cardan shaft | 9305264 | 1 |
| 131 | Вал карданный передний (зад. часть) | Front cardan shaft (rear part) | 9322646-2 | 1 |
| 132 | Вал карданный передний (зад. часть) | Front cardan shaft (rear part) | Z3G.4.1-2 | 1 |
| 133 | Вал карданный с подвесным подшипником в сборе | Cardan shaft with outboard bearing assembly | 252906871 | 1 |
| 134 | Вал КПП 2-ой передачи | 2nd gear gearbox shaft | LW300/860114665/ZL20-033002 | 1 |
| 135 | Вал КПП задней передачи | Reverse gear gearbox shaft | LW300/860114664/ZL20-036003 | 1 |
| 136 | Вал основной ступичный | Main hub shaft | 83513201/SP105819/PY180.39.02-01 | 1 |
| 137 | Вилка фланцевая вала карданного промежуточного | Flange fork of the cardan intermediate shaft | Z3.4.2-01/LW300 | 4 |
| 138 | Втулка | Bushing | 50*65*70/250200493/9301647 | 4 |
| 139 | Втулка | Bushing | 55*58*21/Z3G.8-5/251900107 | 4 |
| 140 | Втулка | Bushing | 60*68*75/252600350 | 4 |
| 141 | Втулка | Bushing | 77*90*17/252600717/9364818/300K.5-1A | 4 |
| 142 | Втулка | Bushing | 85513041/95*76*20 | 4 |
| 143 | Втулка | Bushing | 86*100*18/85513042 | 4 |
| 144 | Втулка вала | Shaft bushing | 60*70*27/860114728/zl20-030032 | 4 |
| 145 | Втулка нижняя | Lower bushing | ZL50E-6-2/250400147 | 4 |
| 146 | Упорная втулка подшипника | Thrust bearing sleeve | 85513034 | 3 |
| 147 | Выключатель давления | Pressure switch | 803676181/PS67-15-2MNZ-A-FLSM08-IP-FS5BARR | 2 |
| 148 | Выключатель давления | Pressure switch | 803678456 | 2 |
| 149 | Гайка | Bolt nut | 71270231 | 5 |
| 150 | Гайка | Bolt nut | 75501646/ZL50EX.04.01.01-017/LG50F.04420A | 5 |
| 151 | Гидроцилиндр | Hydraulic cylinder | 020130000/PY160M | 1 |
| 152 | Гидроцилиндр | Hydraulic cylinder | 140015/PY160-G3 | 1 |
| 153 | Гидроцилиндр подъема | Hydraulic lifting cylinder | 120065/PY180-G6 | 1 |
| 154 | Гидроцилиндр подъема правый | Hydraulic lifting cylinder right | 9326008/Z5G.7.1.3A/252100628 | 1 |
| 155 | Гидроцилиндр подъема стрелы (правый) | Boom lifting hydraulic cylinder (right) | 803071259/XGYG01-129 | 1 |
| 156 | Гидроцилиндр подъема стрелы левый | Boom lifting hydraulic cylinder left | 803013063 | 1 |
| 157 | Гидроцилиндр стрелы (левый) | Boom hydraulic cylinder (left) | 252100629/Z5G.7.1.24A/9326009 | 1 |
| 158 | Гипоидная пара (по часовой) | Hypoid pair (clockwise) | 82215102/82215103 | 1 |
| 159 | Датчик давления масла | Oil pressure sensor | 803502505 | 4 |
| 160 | Датчик температуры воды | Water temperature sensor | 803545325 | 4 |
| 161 | Датчик температуры КПП | Gearbox temperature sensor | 803502732 | 4 |
| 162 | Датчик температуры масла КПП | Gearbox Oil temperature sensor | 803502420 | 4 |
| 163 | Зеркало | Mirror | 801902760/LW300FN | 4 |
| 164 | Зуб центральный | Central tooth | Z3.11.1-1/9301653/250100248/860103046 | 20 |
| 165 | Клапан предохранительный | Safety valve | 803004050(LW500FN) | 2 |
| 166 | Клапан приоритета | Priority Valve | FLD-30Z/ZL30G | 2 |
| 167 | Клапан тормозной | Brake valve | 101000059 | 1 |
| 168 | Колодка тормозная | Brake pad | 103070018/PY180-H.2.6.3 | 4 |
| 169 | Кольцо | Ring | 130*3.1(GB1235-76) | 5 |
| 170 | Кольцо | Ring | 53000013/130-135-30 | 5 |
| 171 | Кольцо нижнего пальца сочленения | Ring of the lower pin of the articulation | 80*5,7/GB1235-76 | 10 |
| 172 | Кольцо стопорное | Locking ring | 52100009 (d-45) | 10 |
| 173 | Корпус планетарной передачи | Planetary Transmission Housing | 83513202/SP115141 | 1 |
| 174 | Корпус тормозного механизма | Brake mechanism housing | PY180-H.2.6.1 | 1 |
| 175 | Кран воздухозаборника | Air intake valve | 252101539 | 2 |
| 176 | Крестовина редуктора моста | Bridge Gearbox Crosspiece | 275101723 | 5 |
| 177 | Кронштейн медной направляющей | Copper guide bracket | 001210005/001210530/PY180G.10.1-1 | 2 |
| 178 | Крышка | Cap | 85513019 | 1 |
| 179 | Крышка нижнего подшипника | Lower bearing cover | 252900353 | 1 |
| 180 | Кулак поворотный левый | Left rotary fist | 1500028 | 1 |
| 181 | Кулак поворотный правый | Right rotary fist | 1500026 | 1 |
| 182 | Накладка | Overlay | 0011312001/GR215.12.2/PY180G.12-7/001210031 | 2 |
| 183 | Накладка | Overlay | 001210030/PY180G.12-6A | 2 |
| 184 | Направляющие медные | Copper guides | 001210007/PY180G.10.1-3/001210007/381600371 | 2 |
| 185 | Насос водяной | Water pump | 860121354/J3600-1307020C | 2 |
| 186 | Насос гидравлический | Hydraulic pump | CBT-E316/CBN-F316 | 1 |
| 187 | Насос гидравлический | Hydraulic pump | CBG2040/JHP2040/W060600000 | 1 |
| 188 | Насос гидравлический (13 шлицов) для фронтального погрузчика | Hydraulic pump (13 slots) for front loader | CBGJ1032/changlin zlm30-5 | 1 |
| 189 | Насос гидравлический (шпонка) | Hydraulic pump (key) | CBGJ2080/5002029/860102735/5002029/860102633/803004540 | 1 |
| 190 | Насос гидравлический (шпонка) | Hydraulic pump (key) | CBGj2100/5000035 | 1 |
| 191 | Насос гидравлический | Hydraulic pump | P5100-F100CX/BL0351/803004078 | 1 |
| 192 | Нож | Knife | 2130*150*20/GR215A | 1 |
| 193 | Нож NEW | Knife NEW | 2130*152*19/GR215A | 1 |
| 194 | Обойма маслосъемная | Oil-removing clip | 83021509 | 2 |
| 195 | Обойма подшипника | Bearing cage | 85513015 | 2 |
| 196 | Палец | Pin | 60*135/252600335/9358267/300K.5-2 | 4 |
| 197 | Палец гидроцилиндра ковша задний (ухо) | Bucket rear hydraulic cylinder pin (ear) | 251702733/60*167 | 4 |
| 198 | Палец | Pin | 60*212 LW330F (II).8.4 | 4 |
| 199 | Палец стрелового цилиндра (Ухо) | Arrow cylinder Pin (Ear) | 251700192/60*230/LW300FN | 4 |
| 200 | Палец ковша нижний | Bucket bottom pin | ZL50GA.7.1/65*200 | 4 |
| 201 | Палец | Pin | 85*220/252903797/4043004230 | 4 |
| 202 | Палец сочленения | Joint pin | GR215PY180G.14-6 | 4 |
| 203 | Палец сочленения | Joint pin | GR215PY180G.14-7 | 4 |
| 204 | Переключатель скоростей (L= 2500 мм) | Speed switch (L= 2500 mm) | LW520G.2.1A/800302763 | 1 |
| 205 | Подшипник | Bearing | 54100005/32022/B120400012/2007122E | 3 |
| 206 | Подшипник | Bearing | 32026X/54100007 | 3 |
| 207 | Подшипник | Bearing | 33113/54100059/54100014/7813 | 3 |
| 208 | Подшипник подвесной | Suspension bearing | 860111011/ZL50G | 2 |
| 209 | Полуось левая | Left half-axis | W44002006/80513003 | 1 |
| 210 | Полуось правая | Right half-axis | 80513004/SP105549/W44002007/80513005 | 1 |
| 211 | Прокладка поддона картера | Sump pallet gasket | ZL20-030020/LW300FN/4110000038130 | 4 |
| 212 | РВД гидроцилиндр наклона ковша | High pressure hose bucket tilt cylinder | 251702648/300FS.7.1.3/LW300FN | 1 |
| 213 | Редуктор моста (против часовой) | Bridge reducer (counterclockwise) | 4.Z3.2.00A | 1 |
| 214 | Редуктор моста | Bridge reducer | 83513200 | 1 |
| 215 | Редуктор переднего моста (по часовой) | Front axle gearbox (clockwise) | 250300319/800302262 | 1 |
| 216 | Реле | Relay | 803604498/XGJD02(JD2914J) | 5 |
| 217 | Ролик 6х30 подшипника игольчатого | Needle bearing roller 6×30 | 75600330 | 10 |
| 218 | Сиденье оператора (без подлокотников) | Operator’s seat (without armrests) | 801902761/XGZY01-II/FS16D-03/LW300F | 1 |
| 219 | Ступица передняя | Front hub |